Bearing Clips Set for MK3S+

Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

This product is the replacement hotend PTFE tube

ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

This product is the replacement hotend PTFE tube

ONLY compatible with the Mini/+

This product is the replacement hotend PTFE tube

ONLY compatible with the MK2.5S MK3S and MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)

This product is the replacement PEI-Ultem sheet. 

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4

MK4XL

Heatbed thermistor set for (MK4)

Compatible with: 

MK4MK3.9MK3.5MK4SMK3.9S

This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break

Compatible with:

MK4XLMK3.9

Double-sided textured PEI powder-coated spring steel sheet compatible with: 

MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4

Pricing includes all Taxes and Customs/Duty fees

Official Prusa Reseller - 1Y MFG Warranty & Support!
"In-Stock" items are for pickup only.
All deliveries subject to current lead-time: 10 Days
Flat-Rate Shipping: $150inc GST per unit, within Australia.

The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste

Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space?  Request a quote to info@shapenerd.com and one of our friendly team will be in touch.

This product is the replacement Hotend fan, compatible with: 

MK3.9MK4XL

This product is a replacement screw for the Nextruder compatible with: 

Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.

MK3.9MK4

This product is a filament sensor for the Nextruder, compatible with: 

MK3.9MK4XL

This product is a replacement part for the xLCD assembly, compatible with: 

MK3.9MK4

This product is the replacement PTFE filament guide tube for the Original Prusa XL 

XL

Double-sided powder-coated PA Nylon spring steel sheet compatible with: 

MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4

This product is an optional accessory, compatible with: 

MK3.9MK4XL

This product is a replacement 40W heater for the Nextruder, compatible with: 

MK3.9MK4XL

This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with: 

MK3.9MK4XL

This product is the replacement part of the Dock Pin for the Original Prusa XL

XL

Needle for nozzle cleaning

Brass Nozzle V6

Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

The ObXidian Nozzle is a high-quality nozzle designed specifically for abrasive materials and for printing at high temperatures.

Compatible with:

MK4XLMK3.9

This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.

Compatible with:

Pricing includes all Taxes and Customs/Duty fees

Official Prusa Reseller - 1Y MFG Warranty & Support!
"In-Stock" items are for pickup only.
All deliveries subject to current lead-time: 10 Days
Flat-Rate Shipping: $150inc GST per unit, within Australia.

The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste

Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space?  Request a quote to info@shapenerd.com and one of our friendly team will be in touch.

Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Pricing includes all Taxes and Customs/Duty fees

Official Prusa Reseller - 1Y MFG Warranty & Support!
"In-Stock" items are for pickup only.
All deliveries subject to current lead-time: 10 Days
Flat-Rate Shipping: $150inc GST per unit, within Australia.

The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste

Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space?  Request a quote to info@shapenerd.com and one of our friendly team will be in touch.

Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.

This improves the overall reliability of the printer and makes changing nozzles much faster.

Compatible with:

MK4 XLMK3.9MK4SMK3.9S

The MK4->MK4S Upgrade Kit contains everything you need to fully upgrade your stock MK4 3D printer to the new MK4S.

The upgrade is supplied as a kit - you need to assemble it yourself. 

This kit is for the newer xLCD version

Thermal paste for the hotend heatbreak - heatsink connection.