Cart
(0)
Prusa CORE One L PP Powder-coated Print Sheet
Price: $175.95
inc GST
Our Prusa CORE One L PP Powder-coated Print Sheet is a Double-sided Powder-coated PP Spring Steel Sheet for Prusa Core One L:
CORE One L
Prusa CORE One L PP Powder-coated Print Sheet
The heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
The Prusa CORE One L PP Powder-coated Print Sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.
The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.
Note:
Consumable parts, such as PEI sheets (smooth, textured, nylon etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.
PRU-C1L-SHT-PP
Specific References
16 other products in the same category
Prusa Calibration Pin XL
This product (Prusa Calibration Pin XL) is the replacement part of the Calibration Pin for the Original Prusa XL
XL
Price
$10.95
- Out of Stock
E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.50mm
The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.50mm is a Genuine E3D Prusa Nozzle featuring an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Price
$110.00
- New
Original Prusa XL+ 2-Tool Assembled 3D Printer
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to [email protected] and one of our friendly team will be in touch.
Price
$5,425.00
Prusament PEI 1010 Natural 1.75mm 500gm
Prusament PEI 1010 is an in-house-made filament at Prusa Research. Prusament PEI 1010 filament is designed for applications that demand high durability and stability under thermal stress, making it ideal for use in aerospace, automotive, and industrial components.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.05mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
Price
$245.00
Prusa CORE One L Satin Powder-coated Print Sheet
Prusa CORE One L Satin Powder-coated Print Sheet is a double-sided satin powder-coated spring steel sheet for Prusa CORE One L.
Compatible with:
CORE One L
Price
$115.00
Prusa IR filament sensor
The Prusa IR filament sensor is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+, MK3.5/S, and Core One/+/L. It is NOT compatible with the MK2.5 and MK3.
Price
$32.95
Prusament PETG Prusa Pro Green 1.75mm 1kg (NFC)
The Prusament PETG Prusa Pro Green 1.75mm 1kg (NFC) is an in-house-made filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
Price
$68.00
- -15%
Prusament PLA Prusa Lipstick Red 1.75mm 1kg
Prusament PLA Prusa Lipstick Red 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Price
$57.80
Regular price
$68.00
Prusament ASA Signal White 800gm (NFC)
Prusament ASA Signal White 800gm (NFC) is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Price
$68.00
Prusament PETG Yellow Gold 1.75mm 1kg
Prusament PETG is an in-house-made filament at Prusa Research, with popular products like Prusament PETG Yellow Gold 1.75mm 1kg available for delivery Australia-wide.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colours.
You can inspect the parameters of every spool made at prusament.com.
Price
$68.00
Original Prusa XL Single-Tool to Five-Head Upgrade
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
Current lead-time: 15 Days
The Original Prusa XL has been designed to allow a simple expansion to up to five toolheads – the Original Prusa XL Single-Tool to Five-Head Upgrade. Additional extruders enable you to combine multiple materials and enjoy multi-colored printing with little to no waste. Please note that the tools required for assembly are not included in the package - they can be purchased separately.
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to [email protected] and one of our friendly team will be in touch.
Price
$3,135.00
Prusa Heatbed Thermistor Set (Core One)
The Prusa Heatbed Thermistor Set (Core One) is a replacement heatbed thermistor set for the Prusa Core One
CORE One/+
Price
$15.95
Original Prusa MK4 to MK4S Upgrade Kit
The Original Prusa MK4 to MK4S Upgrade Kit contains everything you need to fully upgrade your stock MK4 3D printer to the new MK4S.
The upgrade is supplied as a kit - you need to assemble it yourself.
Price
$225.00
Our Prusa CORE One L PP Powder-coated Print Sheet is a Double-sided Powder-coated PP Spring Steel Sheet for Prusa Core One L:
CORE One L