E3D Revo™ High Temperature Hotside PT1000 500c.  Compatible with Prusa Pro HT90 3D printer, Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX

Features: 

• Maximum temperature: 400°C/500°C 
• Filament diameter: 1.75mm   
• Voltage: 24V 
• Power: 40W or 65W

If you’re just getting started with 3D printing or primarily 3D print materials such as PLA, PETG and ASA at standard speeds then these kits are ideal for you. Equipped with 2 brass Revo nozzles and a 40W HeaterCore, our Starter Packs enable you to experiment with the two most common nozzle sizes.

Features: 

• Best value entry-point for Revo 
• Tool-free nozzle changes in under 60 seconds 
• Brass nozzles for everyday 3D printing 
• 40W Heatercore enabling rapid heat-up/cool-down 

High Temperature 500°c Thermistor based on Dyze Design in a cartridge style package. Our High Temperature 500°c Dyze Design style thermistor Cartridge is compatible with v6 and Volcano cartridge-style heat blocks.

Our Prusa Heat Cartridge 40W 24V 120mm is a replacement 40W heater for the Nextruder, compatible with: 

MK3.9/SMK4/SXLCORE One/+ CORE One L

Prusa Heatbed Thermistor (MK3/S/+, MINI/+) set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

Heatbed thermistor set for (MK4)

Compatible with: 

MK4MK3.9MK3.5/SMK4SMK3.9S

This product is a replacement heatbed thermistor set for Core One.

Compatible with:

COREOne/+

The Prusa Heatbed Thermistor Set (Core One) is a replacement heatbed thermistor set for the Prusa Core One

CORE One/+

This product is a replacement NTC thermistor for the Nextruder Heatsink

Compatible with: 

MK3.9/SMK4/SCOREOne/+CORE One L

Our Prusa Hotend Thermistor (MINI/+) is the Genuine Prusa Mini Thermistor for: 

MINIMINI+

Our Prusa Hotend Thermistor (MK2/MK2.5/MK3/S/+) is the Genuine Prusa Thermistor for:

MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2

The Prusa Thermistor NTC 100k 115mm is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with: 

MK3.9MK4/SXLCORE One/+ CORE One L

This product is a replacement NTC thermistor.

Compatible with: 

COREOne/+CORE One L

Our PT100 Temperature sensor Kit is a PT100 Sensor Kit with amplifier.

Our Thermistor 100k ATC Semitec 104GT-2 cartridge is a high quality ATC Semitec 104GT-2 thermistor cartridge to suit most common hot-end heat blocks that use a cartridge style thermistor. 

The Thermistor 100k ATC Semitec 104GT-2 loose is a very high quality ATC Semitec 104GT-2 thermistor with white fiberglass sleeve and 1 meter of wire. 

Our Thermistor 100K ATC Semitec 104GT-2 M3 Screw-In Style is a high quality 100K ATC Semitec 104GT-2 thermistor with a M3 Screw attachment and a quick-release Molex-50-57-94 connector. 1M of wire with a Molex-50-57-94 connector on one end and a JST-XH on the other. A 2 Pin DuPont Connector with heat-shrinking is also provided for your convenience.

High quality NTC 100K B3950 thermistor with white fiberglass sleeve and 1 meter of wire. 

This product, the Thermistor 100k NTC B3950 loose, is a high quality NTC 100K B3950 thermistor, glass bead style, with white fibreglass sleeve and 1 metre of wire. 

Our Thermistor 100K NTC B3950 M3 Screw-In Style is a high quality NTC 100K B3950 thermistor with a M3 Screw attachment and a quick-release Molex-50-57-94 connector.
1M of wire with a Molex-50-57-94 connector on one end and a JST-XH on the other. A 2 Pin DuPont Connector with heat-shrinking is also provided for your convenience.