There are 52 products.
This adapter makes your Nextruder compatible with any V6 nozzle. You can use it on your Original Prusa XL and MK4
Compatible with:
MK3.9MK4/SXLCORE One
Genuine Prusa Linear bearing LM8UU
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)
This product is the replacement PEI-Ultem sheet.
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4MK4SCORE One
Universal lubricant with applicator for printer maintenance.
This product is the replacement Hotend fan, compatible with:
MK3.9MK4XL
This product is a replacement screw for the Nextruder compatible with:
Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.
MK3.9MK4
This product is a filament sensor for the Nextruder, compatible with:
MK3.9MK4XL
This product is a replacement part for the xLCD assembly, compatible with:
MK3.9MK4
Double-sided textured PEI powder-coated spring steel sheet compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
Double-sided powder-coated Satin spring steel sheet compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
Double-sided powder-coated PA Nylon spring steel sheet compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
This product is an optional accessory, compatible with:
MK3.9MK4XL
This product is a replacement 40W heater for the Nextruder, compatible with:
MK3.9MK4XL
This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with:
MK3.9MK4XL
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
Wireless adapter ESP-01S adds support for Wi-Fi to your printer. Please make sure the latest firmware is installed!
Compatible with:
MINI+MINIMK3.9MK4
The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. It extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.
Compatible with:
MK4MK3.9MK3.5MK4SMK3.9S
An accelerometer module for all printer modders who love to tweak and modify their 3D printers! While you won’t need this module for our stock printers, it’s perfect when you need to recalibrate the Input Shaper on your modded printer.
Compatible with:
MK4MK3.9MK3.5MK4SMK3.9S
Linear bearing LM10UU
Compatible with:
MINIMINI+MK3.9/SMK4/S
Spare HEPA filter for Prusa Products please check the compatibility
Compatible with:
HT90 MINI EnclosureXL EnclosureMKx Enclosure
This product is the replacement Hotend heatsink, compatible with:
MK4XLMK3.9MK4SMK3.9S
This product is a replacement set of screws for the Expansion joints.
Compatible with:
This product is a replacement set of Expansion joints for the heatbed.
Compatible with:
This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.
Compatible with:
This product is a replacement Pulley with bearing for the CoreXY, compatible with:
MK4XLMK4S
Double-sided Powder-coated PP Spring Steel Sheet for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
PolyTerra PLA is a bioplastic-based 3D Printing Filament designed to provide ease of use, printing quality, speed, and reliability.
High Quality, 100% Lead and Cadium Free Brass alloy, CNC KITCHEN threaded inserts for 3D Printed parts (PLA, PETG, ABS, RESIN etc)
eSun TPU 95A Flexible 3D Print Filament is a new flexible 3D printing material which offers both durability and flexibility.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
