Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

This product is the replacement part of the Calibration Pin for the Original Prusa XL

XL

Festo fitting QSM-M5, comptaible with:

MMU2SMMU3XL

Thermal paste for the hotend heatbreak - heatsink connection.

The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. It extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.

Compatible with: 

MK4MK3.9MK3.5MK4SMK3.9S

This product is the replacement IR filament sensor-Buddy board cable. It is ONLY compatible with the MINI/+.

Introducing Original Prusa XL Enclosure: Modular box for your XL 3D printer.

All deliveries subject to current lead-time: 10 Days

Original Prusa XL Enclosure is an optional accessory which seamlessly integrates with the Original Prusa XL 3D printer. It provides a stable printing environment with increased temperatures, making printing from advanced materials (PCCF, Nylon, PP, ASA, and more) much easier. It eliminates drafts, prevents warping and thanks to the Advanced Filtration System (HEPA filter, 99.9% efficiency) it also helps to reduce odors and prevents the spread of ultra-fine particles (UFPS) into the air. The Enclosure also lowers printer noise and covers every moving part of your printer.

The Original Prusa XL Enclosure is shipped disassembled as a kit.

A high quality aluminum v6 Heatsink/Cooling Block.

Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

This product is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.

This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.

This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.

PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)

This product is the replacement PEI-Ultem sheet. 

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4

Heatbed-Buddy power cable

This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.