This product is a E3D Prusa Nozzle V6 Brass 0.40mm.

This product is a E3D Prusa Nozzle V6 Brass 0.60mm

E3D Prusa X Nozzle V6 0.40mm – Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

E3D Purpsa Nozzle X 0.60mm from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. The E3D Prusa X Nozzle V6 0.60mm is available now from ShapeShop!

Our Heater Cartridge 40W 24V 12V is an excellent quality, 40w Ceramic Heat cartridge with a stainless steel outer sheath.

Hotend PTFE Tube (MK2.5S, MK3S, MMU2S) is the replacement hotend PTFE tube

ONLY compatible with the MK2.5S MK3S and MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

Our Hotend PTFE Tube (MK3S+, MMU2S) is the replacement hotend PTFE tube

• ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
• NOT compatible with the MK2.5, MK3, MK3S hotends

The Original Prusa MK3 to MK4S Upgrade Kit is the full upgrade that also contains the MK4’s new X/Y precise motors (400 steps, 0.9°per step). It’s the most expensive of all three, but last time you voiced your interest in a full MK2->MK3 upgrade pretty strongly, so we decided to give you a full MK4 upgrade as well. :-)

This product is supplied as a kit - you must assemble it yourself!

Pack of 10 x Heater Cartridge 40W 24V – Excellent quality, 40w 24v Ceramic Heat cartridge with a stainless steel outer sheath, Pack of 10

PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)

This product is the replacement PEI-Ultem sheet. 

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4MK4SCORE One

These are extra cables for your accelerometer. 

Compatible with:

MK3.9/SMK4/SCOREOne/+CORE One L

This product is the replacement Assembled hotend for MK3S+, MK3.5(S), MK3S and MK3

This spare part is compatible with: 

MK3MK3.5MK3/SMK3/S+MK3.5S

Bearing Clips Set for MK3S+

Prusa Bearing Housing 623h is suitable for:

MK3SMK3MK2.5SMK2.5

MK2SMINIMK3S+MINI+

MK2

Prusa CORE One PP Powder-coated Print Sheet is a double-sided Powder-coated PP Spring Steel Sheet for use with the Prusa Core One: 

CORE One/+

This product is a replacement Prusa Expansion Joints Set for the heatbed.

Compatible with: 

MK3.5/SMK3.9/SMK4MK4/SCORE One/+

Prusa Heatbed Power Cable (Einsy) – This product is the replacement Heatbed to Einsy power cable. The Prusa Heatbed Power Cable (Einsy) is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.

Prusa Heatbed Thermistor (MK3/S/+, MINI/+) set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

Our Prusa Hotend Thermistor (MK2/MK2.5/MK3/S/+) is the Genuine Prusa Thermistor for:

MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2

Prusa Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

compatible with: 

MMU2SMMU3MK2.5/SMK3/SMK3/S/+MINI/+CORE One/+ CORE One L

The Prusa IR filament sensor is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+, MK3.5/S, and Core One/+/L. It is NOT compatible with the MK2.5 and MK3. 

The Prusa IR filament Sensor Cable (Einsy) is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.

The Prusa LM10LUU Linear Bearing is compatible with: 

MINIMINI+MK3.9/SMK4/SCORE One/+ CORE One L

Genuine Prusa Linear bearing LM8UU

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4CORE One/+

Our Prusa Lubricant Applicator (5g) is a universal lubricant with applicator for printer maintenance.

This product is a Prusa lubrication set for linear rails (3-6 months interval)

XLCORE One/+

Our Prusa MK4 Smooth PEI Print Sheet is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with: 

MK2.5/SMK3.5/SMK3/S+MK3.9/SMK4/SCORE One/+

Double-sided Powder-coated PP Spring Steel Sheet. This Prusa MK4S PP Powder-coated Print Sheet is suitable for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

The Prusa MK4S Satin Powder-coated Print Sheet is a double-sided powder-coated Satin spring steel sheet compatible with: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

Prusa MK4S Textured Powder-coated Print Sheet is a double-sided textured PEI powder-coated spring steel sheet compatible with: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

The Prusa Nextruder Main Cable is a replacement main cable connecting the Loveboard and xBuddy board.

Compatible with: 

MK4MK3.9MK4SMK3.9S

Our Prusa Noctua Hotend Fan is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.

Prusa Nozzle Cleaning Needle 5pcs is a needle for nozzle cleaning for consistent and quality printing.

Our Prusa PA Nylon Powder-coated Print Sheet is a double-sided powder-coated PA Nylon spring steel sheet that's compatible with: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

Our Prusa Power Cable (Einsy) is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.

Our Prusa Power Panic Cable (Einsy) is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.

Our Prusa Print Fan (Genuine) is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.

Prusa Textile Sleeve 30cm for MK3/S/+.

Compatible with: 

MK4MK3.9MK4SMK3.9SMK3SMK3MK2.5SMK2.5MK3S+MK3.5MK3.5S

The Prusa Textile Sleeve 49cm for MK3/S/+.

Compatible with: 

MK3SMK3MK2.5SMK2.5MK3S+

Prusa Thermal Paste (5g) for the hotend heatbreak - heatsink connection.

Timing belt 2GT X-axis compatible with: 

MK2MK2SMK2.5/SMK3/S/+MK3.5/SMK3.9/SMK4/S