![Prusa Textured PEI Power-coated Spring Steel Sheet Prusa Textured PEI Power-coated Spring Steel Sheet](https://shapeshop.com.au/1155-medium_default/prusa-textured-pei-power-coated-spring-steel-sheet.jpg)
Prusa MK2/MK2.5/MK3 (S & +) Thermistor (Genuine)
7Genuine Prusa Thermistor for:
MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2
Double-sided textured PEI powder-coated spring steel sheet compatible with:
MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
7Genuine Prusa Thermistor for:
MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2
This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.
This product is the replacement hotend PTFE tube
ONLY compatible with the Mini/+
This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.
Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is the replacement IR filament sensor-Buddy board cable. It is ONLY compatible with the MINI/+.
High quality machined v6 Heat Block. Supports cartridge style thermistor.
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with:
MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4
This product is a replacement screw for the Nextruder compatible with:
Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.
MK3.9MK4
Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2
This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.
Genuine Prusa Linear bearing LM8UU
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
Double-sided textured PEI powder-coated spring steel sheet compatible with:
MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4