This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.

Compatible with: 

MK4MK3.9MK4SMK3.9S

This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

Trapezoid Nut compatible with:

 MK3SMK3MK2.5SMK2.5MK2SMMU2SMK3S+MK2

Steel needle file set.

Introducing Original Prusa XL Enclosure: Modular box for your XL 3D printer.

All deliveries subject to current lead-time: 10 Days

Original Prusa XL Enclosure is an optional accessory which seamlessly integrates with the Original Prusa XL 3D printer. It provides a stable printing environment with increased temperatures, making printing from advanced materials (PCCF, Nylon, PP, ASA, and more) much easier. It eliminates drafts, prevents warping and thanks to the Advanced Filtration System (HEPA filter, 99.9% efficiency) it also helps to reduce odors and prevents the spread of ultra-fine particles (UFPS) into the air. The Enclosure also lowers printer noise and covers every moving part of your printer.

The Original Prusa XL Enclosure is shipped disassembled as a kit.

Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. It extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.

Compatible with: 

MK4MK3.9MK3.5MK4SMK3.9S

Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.

This improves the overall reliability of the printer and makes changing nozzles much faster.

Compatible with:

MK3.9MK4/SXLCORE One

High Quality, Hardened Steel abrasion-resistant v6 style nozzles for 1.75mm filament.

The ObXidian Nozzle is a high-quality nozzle designed specifically for abrasive materials and for printing at high temperatures.

Compatible with:

MK3.9MK4/SXLCORE One

This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.

High quality v6 Heat Break.

This product is the replacement PTFE filament guide tube for the Original Prusa XL 

XL

This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.

Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com.