

Replacement heatbed tile for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.
XL
This replacement heatbed tile for the Original Prusa XL 3D printer can be used if one of the tiles on your XL heatbed gets damaged and needs to be replaced. You don’t need to replace the entire heatbed, which consists of 16 individual tiles—you can replace just the damaged one! You don’t have to throw away the replaced heatbed tile immediately. If it’s not too damaged, you can repurpose it in another creative way. After all, it’s a heated pad that conveniently resembles in shape and size, for example, a coaster 😉.
Connector Pinout Diagram:
Dimensions: 90x90 mm
Thickness: 2mm +- 0.2mm
Nominal Voltage: 24V
Nominal Current: 1.44A
Nominal Resistance: 16Ω +- 15% at 25°C
Thermistor: NTC, 100kΩ
Maximum Operating Temperature: 125°C
This product includes:
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break
Compatible with:
MK3.9MK4/SXLCORE One
Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.
Compatible with:
This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9
This product is the replacement PTFE filament guide tube for the Original Prusa XL
XL
2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
High Quality, Hardened Steel abrasion-resistant v6 style nozzles for 1.75mm filament.
Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Linear bearing LM10UU
Compatible with:
MINIMINI+MK3.9/SMK4/S
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.
Replacement heatbed tile for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.
XL