Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

This product is a replacement screw for the Nextruder compatible with: 

Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.

MK3.9MK4

This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break

Compatible with:

MK3.9MK4/SXLCORE One

The ObXidian Nozzle is a high-quality nozzle designed specifically for abrasive materials and for printing at high temperatures.

Compatible with:

MK3.9MK4/SXLCORE One

Replacement bearing clips set for the y-carriage (y-axis).

Compatible with: 

MK4MK3.9MK4SMK3.9S

Replacement heatbed tile for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.

XL

This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.

This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with: 

MK3.9MK4XL

This product is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.

This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.

This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

This product is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.

This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.

This product is the replacement PTFE filament guide tube for the Original Prusa XL 

XL