This product is a replacement 40W heater for the Nextruder, compatible with:
MK3.9MK4XL
This product includes:
Specifications:
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.
Compatible with:
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with:
MK3.9MK4XL
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK4/SXLMK3.9/S
This product is a replacement screw for the Nextruder compatible with:
Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.
MK3.9MK4
This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9
High Quality, Durable, Plated Copper v6 style nozzles for 1.75mm filament.
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. It extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.
Compatible with:
MK4MK3.9MK3.5MK4SMK3.9S
Spare HEPA filter for Prusa Products please check the compatibility
Compatible with:
HT90 MINI EnclosureXL EnclosureMKx Enclosure
This product is a replacement 40W heater for the Nextruder, compatible with:
MK3.9MK4XL
