Prusa Heatbed Thermistor (MK4)

Prusament PETG Jet Black 1.75mm 1kg is an in-house-made filament at Prusa Research.

The whole manufacturing process is closely monitored and tested.

Guarantee ±0.02mm precision and highly consistent colors. 

You can inspect the parameters of every spool made at prusament.com. 

Our Prusa CORE One Satin Powder-coated Print Sheet is a double-sided powder-coated Satin spring steel sheet for Prusa CORE One. 

CORE One/+

The Prusament PLA Prusa Army Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Prusament PETG Tungsten 75% 1.75mm 100g is an in-house-made filament at Prusa Research.

The whole manufacturing process is closely monitored and tested.

Guarantee ±0.03mm precision and highly consistent colors. 

You can inspect the parameters of every spool made at prusament.com. 

This product (Prusa Calibration Pin XL) is the replacement part of the Calibration Pin for the Original Prusa XL

XL

The E3D Prusa Hardened Nozzle (Nickel Plated) 0.40mm nozzle, is compatible with:

MK3.9/SMK4/SXLCORE One/+ CORE One L

Prusa Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

compatible with: 

MMU2SMMU3MK2.5/SMK3/SMK3/S/+MINI/+CORE One/+ CORE One L

The Prusa Thermistor NTC 100k 115mm is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with: 

MK3.9MK4/SXLCORE One/+ CORE One L

E3D Prusa X Nozzle V6 0.40mm – Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. 

The Prusa Nextruder Silicone Sock Set is an optional accessory, compatible with: 

MK3.9MK4XLCORE One/+ CORE One L

The Prusa IR filament sensor is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+, MK3.5/S, and Core One/+/L. It is NOT compatible with the MK2.5 and MK3. 

Prusament PETG Mango Yellow 1.75mm 1kg (NFC) is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors.  You can inspect the parameters of every spool made at prusament.com. 

Our v6 All-Metal MMU2 Heat Break is a qigh quality v6 Heat Break for MMU2, available for delivery, Australia wide.

Introducing Original Prusa XL Enclosure: Modular box for your XL 3D printer.

All deliveries subject to current lead-time: 10 Days

Original Prusa XL Enclosure is an optional accessory which seamlessly integrates with the Original Prusa XL 3D printer. It provides a stable printing environment with increased temperatures, making printing from advanced materials (PCCF, Nylon, PP, ASA, and more) much easier. It eliminates drafts, prevents warping and thanks to the Advanced Filtration System (HEPA filter, 99.9% efficiency) it also helps to reduce odors and prevents the spread of ultra-fine particles (UFPS) into the air. The Enclosure also lowers printer noise and covers every moving part of your printer.

The Original Prusa XL Enclosure is shipped disassembled as a kit.

The ObXidian Nozzle is a high-quality nozzle designed specifically for abrasive materials and for printing at high temperatures.

The E3D Prusa Nextruder Nozzle ObXidian 0.60mm is compatible with:

MK3.9MK4/SXLCORE One/+ CORE One L

The Prusament PETG Magnetite 40% Grey 1.75mm 1kg is an in-house-made filament at Prusa Research.

The whole manufacturing process is closely monitored and tested.

Guarantee ±0.03mm precision and highly consistent colors. 

You can inspect the parameters of every spool made at prusament.com.