Explore the advanced capabilities of smarter extrusion with the Roto Klipper ToolBoard, designed by Robert Lorincz.

Features: 

• Direct assembly to Roto
• Microcontroller: STM32F042 (48MHz)
• Automotive USB communication with Raspberry Pi
• Onboard LIS2DW12 accelerometer
• TMC2209 extruder stepper driver
• 1 x PWM 24V controlled part cooling fan output
• 1 x PWM 5V controlled heatsink fan output with RPM speed input signal
• NTC or PT1000 temperature sensor compatibility
• I/0 for bed-level sensing
• X-stop sensor input
• Toolboard and extruder temperature sensor
• Advanced thermal management system

E3D Revo™ HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included).

E3D Revo™ HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included).

This is a replacement heatsink for Revo™ Six. It retains the same dimensions as the E3D V6 – including height, diameter, and groove mount – so any printer with a V6 setup can use it without a print head redesign.

Features: 

• Compatible with 1.75mm filament
• Anodised black aluminum heatsink keeps things cool and looks cool too
• Identical height, diameter, and groove mounting to E3D V6 for drop-in upgradability 
• Works with Revo HeaterCore and Revo Nozzles – change nozzles without tools and hot tightening! 

E3D Online have developed this Revo-compatible HeatSink in collaboration with Team Voron.  It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. (Note: This means this kit will ship without a fan!)

E3D Revo™ High Temperature Hotside PT1000 500c.  Compatible with Prusa Pro HT90 3D printer, Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX

Features: 

• Maximum temperature: 400°C/500°C 
• Filament diameter: 1.75mm   
• Voltage: 24V 
• Power: 40W or 65W

If you’re just getting started with 3D printing or primarily 3D print materials such as PLA, PETG and ASA at standard speeds then these kits are ideal for you. Equipped with 2 brass Revo nozzles and a 40W HeaterCore, our Starter Packs enable you to experiment with the two most common nozzle sizes.

Features: 

• Best value entry-point for Revo 
• Tool-free nozzle changes in under 60 seconds 
• Brass nozzles for everyday 3D printing 
• 40W Heatercore enabling rapid heat-up/cool-down 

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

These retention springs clip onto your Revo™ HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity. 

Features: 

• Keeps the HeaterCore into good thermal contact with a Revo Nozzle
• Effective in attaching Revo HeaterCore to heatsink 
• Compatible with Revo Micro, Revo Six, and Revo Hemera