Double-sided Powder-coated PP Spring Steel Sheet. This Prusa MK4S PP Powder-coated Print Sheet is suitable for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.
The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.
Note:
Consumable parts, such as PEI sheets (smooth, textured, nylon etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.
Prusa Nozzle Cleaning Needle 5pcs is a needle for nozzle cleaning for consistent and quality printing.
The Prusament PLA Prusa Natural 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
The Prusament PLA Viva La Bronze 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is a replacement Extension board.
Compatible with:
COREOne/+CORE One L
Prusament ASA Signal White 800gm (NFC) is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
These are extra cables for your accelerometer.
Compatible with:
MK3.9/SMK4/SCOREOne/+CORE One L
Prusament PETG is an in-house-made filament at Prusa Research, with popular products like Prusament PETG Yellow Gold 1.75mm 1kg available for delivery Australia-wide.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colours.
You can inspect the parameters of every spool made at prusament.com.
The Prusament PLA Prusa Galaxy Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Prusa Lipstick Red 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Hotend PTFE Tube (MK2.5S, MK3S, MMU2S) is the replacement hotend PTFE tube
ONLY compatible with the MK2.5S MK3S and MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
Prusament PETG Chalky Blue 1.75mm 1kg is an in-house-made 3D printer filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Anthracite Grey 1.75mm 1kg (NFC) is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Our Prusa Mini Hotend Fan (Genuine) is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.
Our v6 All-Metal MMU2 Heat Break is a qigh quality v6 Heat Break for MMU2, available for delivery, Australia wide.
The Prusa IR filament Sensor Cable (Einsy) is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
The Prusament PLA Galaxy Purple 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Double-sided Powder-coated PP Spring Steel Sheet. This Prusa MK4S PP Powder-coated Print Sheet is suitable for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S
