The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.60mm is a genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.60mm is compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Higher Flow. Thanks to E3D’s unique high-flow internal geometry that increases surface area for better heat transfer, these nozzles significantly boost your setup's volumetric flow rate, allowing you to print faster!
Abrasion Resistance. With wear resistance far superior to any generic hardened steel nozzle, ObXidian is exceptionally hard, making it ideal for printing abrasive or filled polymers. This is accomplished by combining a tool steel insert with E3D’s custom E3DLC™ coating. This specially formulated coating also provides non-stick properties, significantly reducing plastic build-up around the nozzle.
Drop-in upgrades. These nozzles maintain the exact same form factor as standard Prusa Nozzles; this means there is no need to adjust your pre-existing mount and fan duct setups.
Quick Nozzle Changing. Changing a nozzle on your Prusa printer has never been easier! Waste less time changing your nozzles and more time experimenting with different sizes and materials.
Easy identification. Each Nozzle has its size engraved into it.
Features:
Technical Parameters:
This product includes:
Genuine E3D Prusa Nozzle: High Flow Obxidian
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
3D Printer Tool Copper Wire Nozzle Cleaning Brush - perfect for cleaning your printer nozzle!
The E3D Prusa Nextruder V6 Nozzle Adapter makes your Nextruder compatible with any V6 nozzle. You can use it on your Original Prusa XL and MK4
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Prusa Nozzle Cleaning Needle 5pcs is a needle for nozzle cleaning for consistent and quality printing.
Prusament PLA Opal Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Prusa Gentlemens Grey 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PETG Tungsten 75% 1.75mm 1kg is an in-house-made filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.03mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
Replacement Prusa Heatbed Tile XL for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.
XL
Prusament PETG V0 is an in-house-made filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. The Prusa GPIO Hackerboard Set extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.
Compatible with:
MK3.5M3.9/SMK4/SCORE One
The Prusament PLA Prusa Natural 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
The Prusament PLA Prusa Marble Grey 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.
Compatible with:
Our Prusa MMU2S Signal cable (Einsy/Rambo) is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.
The Prusa IR filament Sensor Cable (Einsy) is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
Prusa Thermal Paste (5g) for the hotend heatbreak - heatsink connection.
The Prusament PLA Prusa Simply Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Our Prusa PA Nylon Powder-coated Print Sheet is a double-sided powder-coated PA Nylon spring steel sheet that's compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to [email protected] and one of our friendly team will be in touch.
The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.60mm is a genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.60mm is compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
