The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
Advanced Filtration for Prusa CORE One with HEPA and carbon filters is useful when printing ASA and other materials that produce larger volumes of ultra-fine particles and fumes during printing.
The Original Prusa MMU3 Community Version Cable (for CORE One) is for the Original Prusa MMU3 – Prusa's fast, efficient, and easy-to-use solution for printing with up to five filaments at the same time to produce beautiful, colorful prints.
You can quickly turn any 3D object into a multicolored one in PrusaSlicer and EasyPrint!
The Prusament PLA Prusa Gravity Grey 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
E3D Purpsa Nozzle X 0.60mm from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. The E3D Prusa X Nozzle V6 0.60mm is available now from ShapeShop!
Price$59.95
The Prusa XL Textured Powder-coated Print Sheet is a double-sided textured powder-coated spring steel sheet for the Original Prusa XL.
