Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Higher Flow. Thanks to E3D’s unique high-flow internal geometry that increases surface area for better heat transfer, these nozzles significantly boost your setup's volumetric flow rate, allowing you to print faster!
Abrasion Resistance. With wear resistance far superior to any generic hardened steel nozzle, ObXidian is exceptionally hard, making it ideal for printing abrasive or filled polymers. This is accomplished by combining a tool steel insert with E3D’s custom E3DLC™ coating. This specially formulated coating also provides non-stick properties, significantly reducing plastic build-up around the nozzle.
Drop-in upgrades. These nozzles maintain the exact same form factor as standard Prusa Nozzles; this means there is no need to adjust your pre-existing mount and fan duct setups.
Quick Nozzle Changing. Changing a nozzle on your Prusa printer has never been easier! Waste less time changing your nozzles and more time experimenting with different sizes and materials.
Easy identification. Each Nozzle has its size engraved into it.
Features:
Technical Parameters:
This product includes:
Genuine E3D Prusa Nozzle: High Flow Brass
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
3D Printer Tool Copper Wire Nozzle Cleaning Brush - perfect for cleaning your printer nozzle!
The E3D Prusa Nextruder V6 Nozzle Adapter makes your Nextruder compatible with any V6 nozzle. You can use it on your Original Prusa XL and MK4
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Prusa Nozzle Cleaning Needle 5pcs is a needle for nozzle cleaning for consistent and quality printing.
Replacement Prusa Heatbed Wiring (Red Wire) for the heatbed. Red wire used as VCC.
Compatible with:
Prusament PLA Anthracite Grey 1.75mm 1kg (NFC) is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
The Prusa LM10LUU Linear Bearing is compatible with:
MINIMINI+MK3.9/SMK4/SCORE One/+ CORE One L
Genuine E3D Prusa Nozzles like the E3D Prusa Nextruder Nozzle High Flow Brass 0.60mm feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
608-ZZ (608-2z) 8x22x7mm Bearing is used for a variety of popular 3D printers, including Prusa models.
Official Prusa & Bondtech Reseller - 1Y MFG Warranty & Support!
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to [email protected] and one of our friendly team will be in touch.
Replacement wiring for the heatbed. Prusa Heatbed Wiring (Black Wire) used as GND.
Compatible with:
The Prusa Heatbed Thermistor Set (Core One) is a replacement heatbed thermistor set for the Prusa Core One
CORE One/+
Prusa Heatbed Thermistor (MK3/S/+, MINI/+) set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2
Our Prusa Nextruder Heat Block (Genuine) is an aluminium block for the hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9CORE One/+ CORE One L
The Original Prusa MK3 to MK4S Upgrade Kit is the full upgrade that also contains the MK4’s new X/Y precise motors (400 steps, 0.9°per step). It’s the most expensive of all three, but last time you voiced your interest in a full MK2->MK3 upgrade pretty strongly, so we decided to give you a full MK4 upgrade as well. :-)
This product is supplied as a kit - you must assemble it yourself!
Prusament PLA Prusa Orange 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colours. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Noctua Brown 1.75mm 1kg (NFC) is an in-house-made filament from the experts at Prusa Research. The whole manufacturing process is closely monitored and tested to guarantee ±0.02mm precision and highly consistent colours with every print.
The E3D Prusa Nextruder Nozzle Brass 0.30mm is an all-metal high-precision nozzle for the Nextruder that combines both nozzle and heat-break.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Our Prusa Mini/+ Extruder Drive Gear (Motor Pinion) is the replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
