An accelerometer module for all printer modders who love to tweak and modify their 3D printers! While you won’t need this module for our stock printers, it’s perfect when you need to recalibrate the Input Shaper on your modded printer.
If you love modifying your 3D printer, adding new features, and tweaking it to your liking, our accelerometer module for printer developers and modders will surely come in handy! With it, you can easily measure the resonance frequency of each axis and recalibrate your Input Shaper to the optimal values, ensuring your modded 3D printer operates with maximum efficiency.
Our printers come from the factory with pre-configured, optimized Input Shaper values that have been collected and fine-tuned across many of our machines. Therefore, with a standard stock printer, you won’t ever need additional tuning, as any potential improvement after recalibration would be rather insignificant.
However, some modifications, such as a mod on the Nextruder, can impact the printer’s construction to the extent that the original Input Shaper values are no longer valid. You can then easily use our accelerometer to recalibrate it. Simply plug it into the xBuddy board using the connector on the back of the MK4S 3D printer, attach it to the printhead and the heatbed, and perform a full recalibration of the Input Shaper.
Although this tool is intended for modders and developers, installing the accelerometer on the printer and using it is very easy.
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
A very high-quality Plated Copper Heat Block. Resistant to high temperatures, not easily deformed, and has excellent heat transfer capability making it ideal for high temperature printing.
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
Price$59.95
An accelerometer module for all printer modders who love to tweak and modify their 3D printers! While you won’t need this module for our stock printers, it’s perfect when you need to recalibrate the Input Shaper on your modded printer.
