
Hotend PTFE Tube (MK3S+, MMU2S)
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
Double-sided Powder-coated PP Spring Steel Sheet for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.
The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.
Note:
Consumable parts, such as PEI sheets (smooth, textured, nylon etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with:
MK3.9MK4XL
Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is a replacement screw for the Nextruder compatible with:
Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.
MK3.9MK4
This product is the replacement part of the Dock Pin for the Original Prusa XL
XL
Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.
This product is a replacement Pulley with bearing for the CoreXY, compatible with:
MK4XLMK4S
This product is a filament sensor for the Nextruder, compatible with:
MK3.9MK4XL
Double-sided Powder-coated PP Spring Steel Sheet for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/SCORE One