The Prusa CORE One L PA Nylon Powder-coated Print Sheet is a double-sided powder-coated PA Nylon spring steel sheet for the Prusa Core One L:
CORE One L
The heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
This print sheet (Prusa CORE One L PA nylon powder-coated print sheet) is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
The surface of the Prusa CORE One L PA nylon powder-coated print sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.
Note:
Consumable parts, such as PEI sheets (smooth, textured, nylon etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.
Double-sided Prusa CORE One L Smooth PEI Print Sheet.
Compatible with:
CORE One L
Prusa CORE One PP Powder-coated Print Sheet is a double-sided Powder-coated PP Spring Steel Sheet for use with the Prusa Core One:
CORE One/+
Prusament PETG Lipstick Red 1.75mm 1kg is an in-house-made filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
Prusament PETG is an in-house-made filament at Prusa Research, with popular products like Prusament PETG Yellow Gold 1.75mm 1kg available for delivery Australia-wide.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colours.
You can inspect the parameters of every spool made at prusament.com.
The Prusament PLA Galaxy Purple 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
The Original Prusa MK3 to MK4S Upgrade Kit is the full upgrade that also contains the MK4’s new X/Y precise motors (400 steps, 0.9°per step). It’s the most expensive of all three, but last time you voiced your interest in a full MK2->MK3 upgrade pretty strongly, so we decided to give you a full MK4 upgrade as well. :-)
This product is supplied as a kit - you must assemble it yourself!
The Prusa Accelerometer Set is an accelerometer module for all printer modders who love to tweak and modify their 3D printers! While you won’t need this module for our stock printers, it’s perfect when you need to recalibrate the Input Shaper on your modded printer.
Compatible with:
MK4MK3.9MK3.5MK4SMK3.9S
The Prusament PLA Prusa Galaxy Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusa Nozzle Cleaning Needle 5pcs is a needle for nozzle cleaning for consistent and quality printing.
Double-sided powder-coated PA Nylon spring steel sheet for Prusa CORE One.
CORE One/+
The Prusa xLCD Cable is a replacement part for the xLCD assembly, compatible with:
MK3.9MK4
Our Prusa Hotend Thermistor (MINI/+) is the Genuine Prusa Mini Thermistor for:
MINIMINI+
These Genuine E3D Prusa Nextruder Nozzle DiamondBack 0.60mm bring you the most extreme Nextruder Nozzle solution to date.
Our Prusa CORE One L PP Powder-coated Print Sheet is a Double-sided Powder-coated PP Spring Steel Sheet for Prusa Core One L:
CORE One L
The Prusament PLA Prusa Simply Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Our Prusa Mini Heat Block (Genuine) is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.
The Prusa CORE One L PA Nylon Powder-coated Print Sheet is a double-sided powder-coated PA Nylon spring steel sheet for the Prusa Core One L:
CORE One L
