The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
The Prusa CORE One PP Powder-coated Print Sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.
The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.
Note:
Consumable parts, such as PEI sheets (smooth, textured, nylon etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.
The Buddy3D Camera for Prusa CORE One allows you to remotely monitor your prints via Prusa Connect and the Prusa mobile app. It is compatible with the Prusa CORE One 3D printer and requires a Wi-Fi connection to work, compatible with:
Prusament PLA Pearl Mouse 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Our Prusa Noctua Hotend Fan is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.
Prusament PLA Prusa Pro Green 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Price$57.80Regular price$68.00
Prusa CORE One PP Powder-coated Print Sheet is a double-sided Powder-coated PP Spring Steel Sheet for use with the Prusa Core One:
