The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. The Prusa GPIO Hackerboard Set extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.

Compatible with: 

MK3.5M3.9/SMK4/SCORE One

Our Prusa Hall Filament Sensor is a filament sensor for the Nextruder, compatible with: 

MK3.9MK4XLCORE One/+ CORE One L

Our Prusa Heat Cartridge 40W 24V 120mm is a replacement 40W heater for the Nextruder, compatible with: 

MK3.9/SMK4/SXLCORE One/+ CORE One L

Prusa Heatbed Power Cable (Einsy) – This product is the replacement Heatbed to Einsy power cable. The Prusa Heatbed Power Cable (Einsy) is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.

Prusa Heatbed Thermistor (MK3/S/+, MINI/+) set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

Heatbed thermistor set for (MK4)

Compatible with: 

MK4MK3.9MK3.5/SMK4SMK3.9S

This product is a replacement heatbed thermistor set for Core One.

Compatible with:

COREOne/+

The Prusa Heatbed Thermistor Set (Core One) is a replacement heatbed thermistor set for the Prusa Core One

CORE One/+

Replacement Prusa Heatbed Tile XL for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.

XL

Replacement wiring for the heatbed. Prusa Heatbed Wiring (Black Wire) used as GND.

Compatible with: 

MK4MK3.9MK4SMK3.9S

Replacement Prusa Heatbed Wiring (Red Wire) for the heatbed. Red wire used as VCC.

Compatible with: 

MK4MK.9MK4SMK3.9S

This product is a replacement NTC thermistor for the Nextruder Heatsink

Compatible with: 

MK3.9/SMK4/SCOREOne/+CORE One L

Prusa HEPA Filter – Spare HEPA filter for Prusa Products please check the compatibility

Compatible with: 

HT90 MINI EnclosureXL EnclosureMKx Enclosure CORE One/+ CORE One L

The Prusa Hotend Fan (COREOne+ / COREOne L / XL / MK4) is the replacement Hotend fan for:

MK3.9/SMK4/SCOREOne/+CORE One LXL

This product is the replacement Hotend heatsink, compatible with: 

MK4XLMK3.9MK4SMK3.9S

Our Prusa Hotend Thermistor (MINI/+) is the Genuine Prusa Mini Thermistor for: 

MINIMINI+

Our Prusa Hotend Thermistor (MK2/MK2.5/MK3/S/+) is the Genuine Prusa Thermistor for:

MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2

Prusa Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

compatible with: 

MMU2SMMU3MK2.5/SMK3/SMK3/S/+MINI/+CORE One/+ CORE One L

The Prusa IR filament sensor is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+, MK3.5/S, and Core One/+/L. It is NOT compatible with the MK2.5 and MK3. 

The Prusa IR filament Sensor Cable (Einsy) is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.

This power cable connects the LED assembly to the Boost board.

Compatible with: 

SL1S

The Prusa LM10LUU Linear Bearing is compatible with: 

MINIMINI+MK3.9/SMK4/SCORE One/+ CORE One L

Genuine Prusa Linear bearing LM8UU

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4CORE One/+

The Prusa Loveboard is a replacement LoveBoard for the Nextruder, compatible with: 

MK3.9/SMK4/SCORE One/+ CORE One L

Our Prusa Lubricant Applicator (5g) is a universal lubricant with applicator for printer maintenance.

This product is a Prusa lubrication set for linear rails (3-6 months interval)

XLCORE One/+

This product is a replacement set of screws for the Expansion joints.

The Prusa M3x6r Screw Set is compatible with: 

MK4MK.9MK4SMK3.9S

This product is a replacement main cable connecting the Loveboard and xBuddy board.

Compatible with: 

CORE One/+

Our Prusa Mini Extruder Driven Gear (Genuine) is the Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.

Our Prusa Mini Heat Block (Genuine) is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

Our Prusa Mini Hotend Fan (Genuine) is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.

Our Prusa MINI Print head PTFE Tube is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.

Prusa MINI PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.

High Quality Prusa Mini Titanium Alloy Heat Break.

Our Prusa Mini/+ Extruder Drive Gear (Motor Pinion) is the replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.

Our Prusa MK4 Smooth PEI Print Sheet is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with: 

MK2.5/SMK3.5/SMK3/S+MK3.9/SMK4/SCORE One/+

Double-sided Powder-coated PP Spring Steel Sheet. This Prusa MK4S PP Powder-coated Print Sheet is suitable for Original Prusa MK4/S and i3 MK3/S/+ and MK2.5/S heatbeds: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

The Prusa MK4S Satin Powder-coated Print Sheet is a double-sided powder-coated Satin spring steel sheet compatible with: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

Prusa MK4S Textured Powder-coated Print Sheet is a double-sided textured PEI powder-coated spring steel sheet compatible with: 

MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S

The Prusa MMU2S Einsy Power cable is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.

Our Prusa MMU2S Signal cable (Einsy/Rambo) is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.

Our Prusa Nextruder Heat Block (Genuine) is an aluminium block for the hot-end assembly dedicated for printers using Nextruder.

Compatible with: