The Prusa MK4S Satin Powder-coated Print Sheet is a double-sided powder-coated Satin spring steel sheet compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).
Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.
Find more details about the spring steel sheets (including usage and maintenance instructions) in Prusa's knowledge base.
WARNING:
Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's knowledge base.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
The Prusa Door Sensor is the genuine replacement Door Sensor for the CORE One.
Compatible with:
COREOne/+CORE One L
Our Prusa CORE One Textured Powder-coated Print Sheet is a double-sided textured PEI powder-coated spring steel sheet for Prusa CORE One.
CORE One/+
The Prusa WiFi Adapter ESP-01S adds support for Wi-Fi to your printer. Please make sure the latest firmware is installed!
The Prusa WiFi Adapter ESP-01S (MINI+ / MK4) is compatible with:
MINI+MINIMK3.9MK4
The Prusa Filament Sensor cable (Einsy) is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
Current lead-time: 15 Days
The Original Prusa XL has been designed to allow a simple expansion to up to five toolheads – with the Original Prusa XL Dual-Head to Five-Head Upgrade. Additional extruders enable you to combine multiple materials and enjoy multi-colored printing with little to no waste. Please note that the tools required for assembly are not included in the package - they can be purchased separately.
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to [email protected] and one of our friendly team will be in touch.
Prusa SwingArm is a a SwingArm mechanism for your printer.
Compatible with:
COREOne/+
Prusa MINI PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.
The Prusa Set PG Assembley + PG Ring is a replacement for a planetary gear with PG ring, compatible with:
MK3.9/SMK4/SXLCORE One/+ CORE One L
The Prusa IR filament sensor is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+, MK3.5/S, and Core One/+/L. It is NOT compatible with the MK2.5 and MK3.
The Original Prusa MK3 to MK4S Upgrade Kit is the full upgrade that also contains the MK4’s new X/Y precise motors (400 steps, 0.9°per step). It’s the most expensive of all three, but last time you voiced your interest in a full MK2->MK3 upgrade pretty strongly, so we decided to give you a full MK4 upgrade as well. :-)
This product is supplied as a kit - you must assemble it yourself!
The Prusa Heatbed Thermistor Set (Core One) is a replacement heatbed thermistor set for the Prusa Core One
CORE One/+
Prusa HEPA Filter – Spare HEPA filter for Prusa Products please check the compatibility
Compatible with:
HT90 MINI EnclosureXL EnclosureMKx Enclosure CORE One/+ CORE One L
E3D Prusa X Nozzle V6 0.40mm – Nozzle X from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly.
Our Prusa MINI Print head PTFE Tube is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.
The E3D Prusa Nextruder Nozzle High Flow ObX MK4/XL 0.50mm is a Genuine E3D Prusa Nozzle featuring an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One/+ CORE One L
Prusament PETG Shimmering Violet 1.75mm 1kg is an in-house-made filament at Prusa Research.
The whole manufacturing process is closely monitored and tested.
Guarantee ±0.02mm precision and highly consistent colors.
You can inspect the parameters of every spool made at prusament.com.
The Prusa MK4S Satin Powder-coated Print Sheet is a double-sided powder-coated Satin spring steel sheet compatible with:
MMU2MMU3MK2MK2/SMK2.5/SMK3/SMK3/S+MK3.9MK4/S
