Prusament PETG Carbon Fibre is an in-house-made filament at Prusa Research, reinforced with carbon fibre, improving some of its mechanical properties whilst still maintaining an attractive look.  Compared to regular PETG the material has better dimensional stability, temperature resistance, higher modulus of elasticity and is less prone to stringing.  

This product is a replacement screw for the Nextruder compatible with: 

Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.

MK3.9MK4

Hotend Print Fan compatible with: 

MK3.9MK4XL

This product is a replacement part for the xLCD assembly, compatible with: 

MK3.9MK4

This product is a replacement 40W heater for the Nextruder, compatible with: 

MK3.9MK4XL

This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with: 

MK3.9MK4XL

This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.

This product is the replacement hotend PTFE tube

ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

This product is the replacement hotend PTFE tube

ONLY compatible with the Mini/+

This product is the replacement hotend PTFE tube

ONLY compatible with the MK2.5S MK3S and MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

This product is the replacement PTFE filament guide tube for the Original Prusa XL 

XL

This product is an optional accessory, compatible with: 

MK3.9MK4XL

This product is the replacement part of the Dock Pin for the Original Prusa XL

XL

Genuine Prusa Mini Thermistor for: 

MINIMINI+

7Genuine Prusa Thermistor for:

MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2

19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.

This product is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.

Double-sided powder-coated Satin spring steel sheet compatible with: 

MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4

2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.

Trapezoid Nut compatible with:

 MK3SMK3MK2.5SMK2.5MK2SMMU2SMK3S+MK2

This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.

This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.

Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.

This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.

This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.

This product is the replacement IR filament sensor-Buddy board cable. It is ONLY compatible with the MINI/+.

Heatbed-Buddy power cable

This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.

This product is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.

This is Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.

This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

Double-sided textured PEI powder-coated spring steel sheet compatible with: 

MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4

This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with: 

MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4

Double-sided powder-coated Satin spring steel sheet for the Original Prusa Mini/Mini+.

Bearing Clips Set for MK3S+

This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.

Heatbed thermistor set for (MK4)