There are 49 products.
Active filters
This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
This product is the replacement hotend PTFE tube
ONLY compatible with the Mini/+
This product is the replacement hotend PTFE tube
ONLY compatible with the MK2.5S MK3S and MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
7Genuine Prusa Thermistor for:
MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2
This is Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
This product is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.
This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S.
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI for the Original Prusa i3 MK3/S and MK2.5/S heatbeds.
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI).
Double-sided powder-coated Satin spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S.
Double-sided powder-coated Satin spring steel sheet for the Original Prusa Mini/Mini+.
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa Mini/Mini+
2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.
This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.
This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.
Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2
This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.
Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1
This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.
This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.
This product is the replacement IR filament sensor-Buddy board cable. It is ONLY compatible with the MINI/+.
This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.
This product is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.
PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)
This product is the replacement PEI-Ultem sheet.
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
A ShapeNerd favourite!
eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
eSun TPU 95A Flexible 3D Print Filament is a new flexible 3D printing material which offers both durability and flexibility.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
High Quality, Polished brass Swiss style MK8 nozzle
Optimal thermal properties for everyday printing
Smooth layers for standard non-abrasive applications
Rated to a max temperature of 300°C
eSUN ePA-CF Nylon Carbon Fibre - Nylon based with 20% Carbon Fibre. High strength, High rigidity, wear resistant and it looks fantastic!
