eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
Product Features:
Optimised to print with significantly less warping
Good melt mobility and smooth printing.
High toughness, hardness and rigidity.
Good scratch resistance.
Good heat resistance and oil resistance.
ABS+ is designed to print with significantly less shrinkage. Unlike other original ABS filaments, it cannot be polished by using Acetone.
If you need to use Acetone to smooth the surface of your print, we would recommend you try our original ABS filament.
| Recommended Print Settings | ||
| Nozzle Temp | C | 240 |
| Bed Temp | C | 95-110 |
| Print Speed | mm/s | 40-100 |
| Filament Properties | ||
| Density | g/cm3 | 1.06 |
| Melt Flow Index | g/10min | 15 |
| Heat Distortion | C | 73 |
| Tensile Strength | MPa | 40 |
| Elongation at Break | % | 30 |
| Flexural Strength | MPa | 68 |
| Flexural Modulus | MPa | 1203 |
| IZOD Impact Strength | kJ/m2 | 42 |
ASA is a fantastic ABS replacement. Its UV resistance is fantastic and this makes it perfect for Outdoor use.
eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.
eABS MAX is a high quality halogen-free, flame retardant 3D filament that adds to the toughness of ABS+ and offers flame retardant efficiency.
eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
