![Prusa Smooth PEI Spring Steel Sheet Prusa Smooth PEI Spring Steel Sheet](https://shapeshop.com.au/1161-medium_default/prusa-smooth-pei-spring-steel-sheet.jpg)
![Prusa Smooth PEI Spring Steel Sheet Prusa Smooth PEI Spring Steel Sheet](https://shapeshop.com.au/1161-medium_default/prusa-smooth-pei-spring-steel-sheet.jpg)
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with:
MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4
Update:
The steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Spring Steel Sheet With Smooth Double-sided PEI uses the same PEI sheets as on the MK2/S. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.
You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.
Find more details about the spring steel sheets in Prusa's knowledgebase.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
Tiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim.
This product is a replacement 40W heater for the Nextruder, compatible with:
MK3.9MK4XL
Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1
Prusament ASA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.03mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.
This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.
Genuine Prusa Linear bearing LM8UU
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
This product is a replacement NTC thermistor for the Nextruder and also the XL Heatsink, compatible with:
MK3.9MK4XL
2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI compatible with:
MK3SMK3MK2.5SMK2.5MK2SMMU3MK3S+MMU2MK2MK4