Thermal paste for the hotend heatbreak - heatsink connection.

Bearing housing 623h

MK3SMK3MK2.5SMK2.5

MK2SMINIMK3S+MINI+

MK2

This product is the replacement Hotend fan MINI/+. It is ONLY compatible with the Original Prusa MINI/+.

Spare HEPA filter for Prusa Products please check the compatibility

Compatible with: 

HT90 MINI EnclosureXL EnclosureMKx Enclosure 

This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.

This product is the replacement Hotend heaterblock MINI. It is ONLY compatible with the Original Prusa MINI/+.

This product is the replacement part of the Calibration Pin for the Original Prusa XL

XL

This product is the replacement hotend PTFE tube

ONLY compatible with the Mini/+

Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:

MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2

Replacement heatbed tile for the Original Prusa XL. The entire heatbed of the XL printer consists of 16 individual tiles.

XL

This product is the replacement Hotend heatsink, compatible with: 

MK4XLMK3.9MK4SMK3.9S

Trapezoid Nut compatible with:

 MK3SMK3MK2.5SMK2.5MK2SMMU2SMK3S+MK2

This product is a replacement Pulley with bearing for the CoreXY, compatible with: 

MK4XLMK4S

This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.

7Genuine Prusa Thermistor for:

MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2

This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.

2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.

This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.

This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.

Bearing Clips Set for MK3S+

Wireless adapter ESP-01S adds support for Wi-Fi to your printer. Please make sure the latest firmware is installed!

Compatible with: 

MINI+MINIMK3.9MK4

The GPIO module (General Purpose Input/Output) is an optional add-on PCB that can be connected to the Original Prusa MK4/S, MK3.9/S, or MK3.5/S. It extends functionality by allowing you to control and receive input from external devices using GPIO pins and G-code commands.

Compatible with: 

MK4MK3.9MK3.5MK4SMK3.9S

An accelerometer module for all printer modders who love to tweak and modify their 3D printers! While you won’t need this module for our stock printers, it’s perfect when you need to recalibrate the Input Shaper on your modded printer.

Compatible with: 

MK4MK3.9MK3.5MK4SMK3.9S

This product is the replacement hotend PTFE tube

ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

This product is the replacement hotend PTFE tube

ONLY compatible with the MK2.5S MK3S and MMU2S hotends

NOT compatible with the MK2.5, MK3, MK3S hotends

Linear bearing LM10UU

Compatible with: 

MINIMINI+MK3.9/SMK4/S

This product is a replacement set of screws for the Expansion joints.

Compatible with: 

MK4MK.9MK4SMK3.9S

Replacement wiring for the heatbed. Red wire used as VCC.

Compatible with: 

MK4MK.9MK4SMK3.9S

Replacement wiring for the heatbed. Black wire used as GND.

Compatible with: 

MK4MK3.9MK4SMK3.9S

This product is a replacement set of Expansion joints for the heatbed.

Compatible with: 

MK4MK3.9MK4SMK3.9S

Replacement bearing clips set for the y-carriage (y-axis).

Compatible with: 

MK4MK3.9MK4SMK3.9S

Excellent quality, 40w 24v Ceramic Heat cartridge with a stainless steel outer sheath, Pack of 10

This product is the replacement power cable connecting xBuddy board and the power supply unit (PSU). It is ONLY compatible with the black PSU.

Compatible with: 

MK4MK3.9MK4SMK3.9S

Steel needle file set.

Introducing Original Prusa XL Enclosure: Modular box for your XL 3D printer.

All deliveries subject to current lead-time: 10 Days

Original Prusa XL Enclosure is an optional accessory which seamlessly integrates with the Original Prusa XL 3D printer. It provides a stable printing environment with increased temperatures, making printing from advanced materials (PCCF, Nylon, PP, ASA, and more) much easier. It eliminates drafts, prevents warping and thanks to the Advanced Filtration System (HEPA filter, 99.9% efficiency) it also helps to reduce odors and prevents the spread of ultra-fine particles (UFPS) into the air. The Enclosure also lowers printer noise and covers every moving part of your printer.

The Original Prusa XL Enclosure is shipped disassembled as a kit.

PRE-ORDER ONLY, fully refundable deposit

The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Approximate final pricing including customs, duties & GST:
$2599 Assembled
$1999 Kit

Shipping begins January 2025