There are 225 products.
Swiss MK10 All-Metal...
High quality Swiss Style MK10 All-Metal Upgrade Kit w/ 0.4mm Nozzle.
eSUN ePAHT-CF High...
eSun ePAHT-CF Carbon Fiber 3D filament is a high-performance material based on PA6 developed by eSUN and LUVOCOM with 15% high-rigidity carbon fiber. It offers High strength, High rigidity, can sustain temperatures of 150c and short-term temperatures of 180c and it looks fantastic!
eSUN eSilk Rainbow PLA 3D...
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
A ShapeNerd favourite!
eSUN ABS 3D Filament 1.75mm...
eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.
eSUN ABS-MAX Filament...
eABS MAX is a high quality halogen-free, flame retardant 3D filament that adds to the toughness of ABS+ and offers flame retardant efficiency.
eSUN PLA-ST Super-Tough PLA
eSun PLA-ST "Super Tough PLA" offers outstanding mechanical properties while printing easily like other PLA filaments. PLA-ST filament; the perfect choice for printing mechanical part prototypes.
GT2 Dual Timing Pulley
Precision machined GT2 Synchronous Pulleys. Available in a variety of teeth count, shaft/bore size and belt width. Perfect for linear motion with minimal backlash and maximal positioning accuracy.
Gates Powergrip® 2GT | 6mm...
Genuine Gates Powergrip® *2GT* Belt cut by the meter of your choosing
v6 Brass Nozzle for 2.85/3mm
High Quality, Polished brass v6 style nozzles for 2.85/3mm Filament
Optimal thermal properties for everyday printing
Smooth layers for standard non-abrasive applications
Rated to a max temperature of 300°C
MK10 Brass Nozzle - PTFE...
High Quality, Polished brass MK10 style nozzle
Optimal thermal properties for everyday printing
Smooth layers for standard non-abrasive applications
Rated to a max temperature of 300°C
Thermistor 100K NTC B3950...
High quality NTC 100K B3950 thermistor with a M3 Screw attachment and a quick-release Molex-50-57-94 connector.
1M of wire with a Molex-50-57-94 connector on one end and a JST-XH on the other. A 2 Pin DuPont Connector with heat-shrinking is also provided for your convenience.
Thermistor 100K ATC Semitec...
High quality 100K ATC Semitec 104GT-2 thermistor with a M3 Screw attachment and a quick-release Molex-50-57-94 connector.
1M of wire with a Molex-50-57-94 connector on one end and a JST-XH on the other. A 2 Pin DuPont Connector with heat-shrinking is also provided for your convenience.
v6 Plated Copper Nozzle for...
High Quality, Durable, Plated Copper v6 style nozzles for 1.75mm filament.
Swiss Style MK8 Plated...
High Quality, Durable, Non-Stick, Plated Copper Swiss style MK8 nozzle.
M6 Thread, 1.75mm Filament.
Leadscrew Coupling 5mm/8mm
Helps remove Z-Axis Play and has even clamping around the leadscrew and motor shaft.
bowden collet retainer clip...
Retainer clips for bowden couplings (suits PC4 and related fittings)
3 clips included
CR10/Ender3/Swiss Plated...
A very high-quality Plated Copper Heat Block. Resistant to high temperatures, not easily deformed, and has excellent heat transfer capability making it ideal for high temperature printing.
v6 Plated Copper Heat Block
A very high-quality Plated Copper Heat Block. Resistant to high temperatures, not easily deformed, and has excellent heat transfer capability making it ideal for high temperature printing.
Volcano Plated Copper Heat...
A very high-quality Plated Copper Heat Block. Resistant to high temperatures, not easily deformed, and has excellent heat transfer capability making it ideal for high temperature printing.
High Temperature 500°c Dyze...
High Temperature 500°c Thermistor based on Dyze Design in a cartridge style package. Compatible with v6 and Volcano cartridge-style heat blocks.
CR10/Ender3 Bi-Metal...
This is a high quality, titanium & copper alloy bi-metal heat-break.
Hemera Heat Break
High Quality Hemera heat break. M4 threaded cold-side, M6 Threaded hot-side.
eSUN ePLA-LW Light weight PLA
eSun ePLA-LW Light Weight PLA is a new material specifically designed for printing RC Aeroplanes and other lightweight items.The foaming ratio is up to 220%!
**PLEASE NOTE NATURAL IS OUT OF STOCK ETA AT THIS STAGE IS UNKNOWN AND WE WILL KEEP PAGE UPDATED**
eSUN eSTARS-PLA Filament...
A PLA Based filament with Glow-in-the-dark star-like appearance!
eSUN PVA+
eSUN PVA+ is a water soluable filament which is ideal as a support material for PLA, PLA+, ABS, ABS+, ABS-MAX, Nylon and others.
F605-RS 5x14x5mm Flanged...
Quality F605-RS 5x14x5mm Flanged, Rubber Sealed ABEC7 Bearing. Sold Individually.