BMG Extruder Shaft Assembly

This product is a BMG Extruder Stepper Gear, which is a copper gear that is attached to the stepper motor used to drive a BMG Extruder.

Explore the advanced capabilities of smarter extrusion with the Roto Klipper ToolBoard, designed by Robert Lorincz.

Features: 

• Direct assembly to Roto
• Microcontroller: STM32F042 (48MHz)
• Automotive USB communication with Raspberry Pi
• Onboard LIS2DW12 accelerometer
• TMC2209 extruder stepper driver
• 1 x PWM 24V controlled part cooling fan output
• 1 x PWM 5V controlled heatsink fan output with RPM speed input signal
• NTC or PT1000 temperature sensor compatibility
• I/0 for bed-level sensing
• X-stop sensor input
• Toolboard and extruder temperature sensor
• Advanced thermal management system

The Prusa Loveboard is a replacement LoveBoard for the Nextruder, compatible with: 

MK3.9/SMK4/SCORE One/+ CORE One L

Our Prusa Mini Extruder Driven Gear (Genuine) is the Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.

Prusa Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

compatible with: 

MMU2SMMU3MK2.5/SMK3/SMK3/S/+MINI/+CORE One/+ CORE One L

Our Prusa Thumb Screw M4x8 is a replacement screw for the Nextruder compatible with: 

MK3.9MK4CORE One/+ CORE One L

Our Prusa Mini/+ Extruder Drive Gear (Motor Pinion) is the replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.

This product is a Titan Extruder Motor gear

High Quality Titan Extruder Gear with a POM Machined Stepper gear and precision-milled stainless hobb.

This product is a replacement Extension board.

Compatible with: 

COREOne/+CORE One L

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

Our Prusa Hall Filament Sensor is a filament sensor for the Nextruder, compatible with: 

MK3.9MK4XLCORE One/+ CORE One L

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C