Titan Extruder Gear

BMG Extruder Gear shaft assembly

Our Prusa Hall Filament Sensor is a filament sensor for the Nextruder, compatible with: 

MK3.9MK4XLCORE One/+ CORE One L

Our Prusa Thumb Screw M4x8 is a replacement screw for the Nextruder compatible with: 

MK3.9MK4CORE One/+ CORE One L

Prusa Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1

compatible with: 

MMU2SMMU3MK2.5/SMK3/SMK3/S/+MINI/+CORE One/+ CORE One L

This product is a replacement Extension board.

Compatible with: 

COREOne/+CORE One L

This product is a BMG Extruder Stepper Gear, which is a copper gear that is attached to the stepper motor used to drive a BMG Extruder.

The Prusa Loveboard is a replacement LoveBoard for the Nextruder, compatible with: 

MK3.9/SMK4/SCORE One/+ CORE One L

This product is a Titan Extruder Motor gear

Explore the advanced capabilities of smarter extrusion with the Roto Klipper ToolBoard, designed by Robert Lorincz.

Features: 

• Direct assembly to Roto
• Microcontroller: STM32F042 (48MHz)
• Automotive USB communication with Raspberry Pi
• Onboard LIS2DW12 accelerometer
• TMC2209 extruder stepper driver
• 1 x PWM 24V controlled part cooling fan output
• 1 x PWM 5V controlled heatsink fan output with RPM speed input signal
• NTC or PT1000 temperature sensor compatibility
• I/0 for bed-level sensing
• X-stop sensor input
• Toolboard and extruder temperature sensor
• Advanced thermal management system

Our Prusa Mini/+ Extruder Drive Gear (Motor Pinion) is the replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.

Our Prusa Mini Extruder Driven Gear (Genuine) is the Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C