eSUN PETG Filament 1.75mm...
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
There are 226 products.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
A material developed by eSUN and LUVOCOM based on PA12, added with 15% carbon fiber, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)
This product is the replacement PEI-Ultem sheet.
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
eSUN PLA+ refill pack can be installed on your clear filament spool or you can print your own.
Excellent quality, 60w Ceramic Heat cartridge with a stainless steel outer sheath.
A material developed by eSUN and LUVOCOM, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
M5 slide-in Tee Nut / T Nut
These Tee nuts fits v-slot and most aluminium t-slot extrusion
Genuine ANTCLABS BLTouch Smart Auto Bed Levelling Sensor
All BL Touch's are tested as "working" prior to despatch
Precision machined GT2 80Tooth Synchronous Pulleys. Perfect for linear motion with minimal backlash and maximal positioning accuracy.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
eSUN Silk Magic - a new composite PLA filament made with glossy silk appearance in two tone. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
eSun PLA PRO Bio-Based Resin is a environmental friendly resin made for LCD/LED light source printers.
eSun Standard 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.
eSun High-Temp 3D Print Resin is specifically designed temperature resistance and can be heated to 120C. Can be used for high temperature dental molds to meet the needs of dental model assembly and manufacturing fine, high temp with low deformation.
eSun eLastic 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.
Universal lubricant with applicator for printer maintenance.
This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.
Genuine Prusa Linear bearing LM8UU
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.
Genuine Gates Powergrip® *2GT* Belt cut by the meter of your choosing
POWGE 2GT 9mm Timing belt, Available by the meter and cut to length. This is a very high quality belt.
PolyTerra PLA is a bioplastic-based 3D Printing Filament designed to provide ease of use, printing quality, speed, and reliability.
PolyTerra PLA is a bioplastic-based 3D Printing Filament designed to provide ease of use, printing quality, speed, and reliability.
PolyTerra PLA is a bioplastic-based 3D Printing Filament designed to provide ease of use, printing quality, speed, and reliability.
PolyTerra PLA is a bioplastic-based 3D Printing Filament designed to provide ease of use, printing quality, speed, and reliability.
PolyTerra ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
PolyTerra ASA is an alternative to ABS with improved weather resistance.
Its UV resistance and excellent mechanical properties make it the perfect choice for real-life applications.
PROTECT OUR ENVIRONMENT, 100% LEAD and CADMIUM FREE Brass alloy
High Quality, 100% Lead and Cadium Free Brass alloy, CNC KITCHEN threaded inserts for 3D Printed parts (PLA, PETG, ABS, RESIN etc)
eSUN Silk Mystic - a new composite PLA filament made with glossy silk appearance with a three colour gradient. Due to the elastic-like properties of this filament layers are very difficult to distinguish.
eSUN PLA-HS is suitable for high-speed printing, ideal for rapid prototyping where prints can achieve smooth finishes without clogging or deforming during the printing process.
eFLEX TPU has high flexibility, flexural tensile resistance, wear resistant and age resistant. The product prints with a certain degree of transparency.
Through the modification of PLA, ePLA-Lite not only maintains the characteristics of easy printing of PLA filament, but also improves the printing performance and physical strength on the original material. This is a cost-effective alternative.