Product Features
Standard Resin, Compatible to most LCD printers and DLP with LED UV.
High Hardness 78-82 shore D, Low Shrinkage
Faster Printing Speed
Low Odor and No Toxic

Resin parameters
Solidify wavelength: 395nm to 405nm
Hardness (D): 78-82D
Viscosity (25C,mPa.s): 170 to 200 mpa.s
Density: 1.08 to 1.13 g / cm3
Shrinkage of Vol.: 3.72%-4.24%

Physical Properties
Flexural strength (Mpa): 46Mpa to 72Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile strength (Mpa): 46Mpa to 67 Mpa
Elongation at break (%): 28% to 36%
Hardness (D): 78-82D

Precautions

Storage

1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
3) Avoid any dusty or moist environment.

Usage

Shake well before use. Avoid any direct sunlight during usage.
Keep away from the children.
Do not drink, do not put in mouth.
Wear gloves and safety equipment.
Avoid direct contact with the skin.
Use only in a well ventilated room.
If product comes in contact with skin, please wash with plenty of water immediately. Seek medical advice immediately if necessary.
Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.