There are 89 products.
Prusa IR filament Sensor...
2This product is the replacement IR filament sensor to Einsy cable. It is ONLY compatible with the MK3S/MK3S+. It is NOT compatible with the MK3.
Prusa IR filament sensor
This product is the replacement IR filament sensor. It is ONLY compatible with the MK2.5S and MK3S/MK3S+. It is NOT compatible with the MK2.5 and MK3.
Prusa MMU2S Einsy Power cable
This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.
Prusa Filament Sensor cable...
This product is the replacement Filament sensor-Einsy cable. It is ONLY compatible with the MK3. It is NOT compatible with the MK3S/+.
Prusa Heatbed Thermistor...
Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2
Prusa MMU2S Signal cable...
This product is the replacement MMU2S-Einsy/Rambo signal cable. It is compatible with the MK2.5/S and MK3/S.
Prusa Idler Spring
Idler Spring - for use across Most Prusa models except MK2/s and SL1/CW1
Prusa Power Panic Cable...
This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.
Prusa Power Cable (Einsy)
This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.
Prusa Mini IR Filament...
This product is the replacement IR filament sensor-Buddy board cable. It is ONLY compatible with the MINI/+.
Prusa Heatbed Power Cable...
This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.
Prusa Noctua Hotend Fan
This product is the replacement Hotend fan Noctua. It is ONLY compatible with the MK3/S/+. The MK2.5/S Rambo requires the v-cable adapter, the fan can NOT be connected to the MK2.5/S Rambo directly.
eSUN Luminous Rainbow PLA
eSun Luminous Rainbow is a modified PLA material. It has gorgeous luminous rainbow appearance effect! The luminous effect can change based on the UV Radiation received!
eSUN PETG Filament 1.75mm...
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
eSUN ePA12-CF Nylon Carbon...
A material developed by eSUN and LUVOCOM based on PA12, added with 15% carbon fiber, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
PEI-Ultem Sheet
PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+)
This product is the replacement PEI-Ultem sheet.
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
Prusa Bearing Housing 623h
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
eSUN PLA+ Refilament 1.75mm...
eSUN PLA+ refill pack can be installed on your clear filament spool or you can print your own.
eSUN ePA12 Nylon
A material developed by eSUN and LUVOCOM, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
Prusament PLA Prusa Galaxy...
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Pearl Mouse...
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PLA Prusa Orange...
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Prusament PETG Prusa Orange...
Prusament PETG is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
eSUN eMAGIC Silk PLA...
eSUN Silk Magic - a new composite PLA filament made with glossy silk appearance in two tone. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
eSUN PLA-PRO Resin 1 Litre
eSun PLA PRO Bio-Based Resin is a environmental friendly resin made for LCD/LED light source printers.
eSUN Standard Resin 1 Litre
eSun Standard 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.
eSUN High-Temp Resin 1 Litre
eSun High-Temp 3D Print Resin is specifically designed temperature resistance and can be heated to 120C. Can be used for high temperature dental molds to meet the needs of dental model assembly and manufacturing fine, high temp with low deformation.
eSUN eLastic Resin 500g
eSun eLastic 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.
Prusa Lubricant Applicator...
Universal lubricant with applicator for printer maintenance.
Prusa Mini/+ Extruder Drive...
This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.
Prusa LM8UU Linear Bearing
Genuine Prusa Linear bearing LM8UU
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2MK4
Prusa MINI PTFE Fitting
PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.
eSUN PLA eMystic Tri-Colour...
eSUN Silk Mystic - a new composite PLA filament made with glossy silk appearance with a three colour gradient. Due to the elastic-like properties of this filament layers are very difficult to distinguish.