Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.   

Product Features:

•     Compatibility: Bambu Lab P1, P1S
•     Drop-in replacement HotEnd for Bambu P1
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

E3D Revo™ Belt nozzle for printing on a 45. Compatible with Prusa Pro HT90 printer.

These Genuine E3D premium DiamondBack Prusa nozzles bring you the most extreme Nextruder Nozzle solution to date.   

E3D Prusa Nextruder Nozzle DiamondBack 0.40mm Features:

•     Compatibility with Nextruder: Prusa MK3.9/S, MK4/S, XL, COREOne/+/L
•     Easy installation
•     Solid Diamond, not just a coating
•     Ultimate abrasion resistance, print with any filament
•     Heat creep resistant heatbreak

Compatible with:

MK3.9MK4/SCOREOne/+CORE One LXL

The E3D Revo Nozzle High Flow Obxidian 500 0.60mm is a high-quality 3D printing nozzle. Available for shipping Australia-wide.

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

Powered by brand new ObXiDian® 500 technology, these premium nozzles are an official collaboration between E3D and Prusa. Users will get exceptional wear-resistance that effortlessly outshines other hardened nozzles. This long-lasting, simple upgrade allows you to easily achieve pristine prints with ANY filament over and over again! 

Product Features:

•     Compatibility with Nextruder: Prusa MK3.9/S, MK4/S, XL, COREOne/+/L
•     Easy installation
•     Built to last - five times more wear resistant than ObXidian
•     Ultimate abrasion resistance, print with any filament even glow in the dark filaments
•     Heat creep resistant heatbreak

Compatible with:

MK3.9MK4/SCOREOne/+CORE One LXL

Powered by brand new ObXiDian® 500 technology, these E3D Prusa Nextruder Nozzle Obxidian 500 0.40mm nozzels are an official collaboration between E3D and Prusa. Users will get exceptional wear-resistance that effortlessly outshines other hardened nozzles. This long-lasting, simple upgrade allows you to easily achieve pristine prints with ANY filament over and over again! 

Product Features:

•     Compatibility with Nextruder: Prusa MK3.9/S, MK4/S, XL, COREOne/+/L
•     Easy installation
•     Built to last - five times more wear resistant than ObXidian
•     Ultimate abrasion resistance, print with any filament even glow in the dark filaments
•     Heat creep resistant heatbreak

Compatible with:

MK3.9MK4/SCOREOne/+CORE One LXL

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.   

E3D Bambu Lab X1/P1 HotEnd High Flow Obxidian 0.40mm Product Features:

•     Compatibility: Bambu Lab X1, X1C (X1 Carbon), P1S, and P1P
•     Drop-in replacement HotEnd for Bambu X1 and P1 Series
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date. E3D Bambu Lab X1 Series Complete Hotend High Flow Obxidian 0.40mm offer a wide range of key benefits and features.

Product Features:

•     Compatibility: Bambu Lab X1, X1C (X1 Carbon)
•     Drop-in replacement HotEnd for Bambu X1
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Powered by brand new ObXiDian® 500 technology, these E3D Prusa Nextruder Nozzle High Flow Obxidian 500 0.60mm nozzles are an official collaboration between E3D and Prusa. Users will get exceptional wear-resistance that effortlessly outshines other hardened nozzles. This long-lasting, simple upgrade allows you to easily achieve pristine prints with ANY filament over and over again! 

Product Features:

•     Compatibility with Nextruder: Prusa MK3.9/S, MK4/S, XL, COREOne/+/L
•     Easy installation
•     Built to last - five times more wear resistant than ObXidian
•     Ultimate abrasion resistance, print with any filament even glow in the dark filaments
•     Heat creep resistant heatbreak

Compatible with:

MK3.9MK4/SCOREOne/+CORE One LXL

The E3D Revo Nozzle High Flow Brass 0.80mm nozzle for fast printing. Compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

E3D Prusa Nextruder Nozzle Brass 0.60mm is an all-metal high-precision nozzle for the Nextruder that combines both nozzle and heat-break.

Compatible with:

MK3.9MK4/SXLCORE One/+ CORE One L

Genuine E3D premium, high-flow Obxidian Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max and Ender 3 V3/Plus 3D printers.

Product Features:

•     Compatibility: Creality K1C, K1 Max, Ender 3 V3, Ender 3 V3 Plus
•     Swift Installation
•     83% additional flow rate when compared to the stock Creality nozzles
•     Titanium heat creep resistant HeatBreak
•     E3D multi-channel High Flow insert design
•     Great for speedy PLA printing

Genuine E3D Bambu Lab X1/P1 HotEnd High Flow Obxidian 0.60mm were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.   

Product Features:

•     Compatibility: Bambu Lab X1, X1C (X1 Carbon), P1S, and P1P
•     Drop-in replacement HotEnd for Bambu X1 and P1 Series
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

The CR-10S PRO All Metal Upgrade Kit is a high-quality, all metal upgrade kit for CR-10S PRO and machines that use the PRO Heat sink

E3D Prusa Nextruder Nozzle CHT High Flow Brass 0.60mm

An all-metal high-precision high-flow nozzle with a CHT (Core Heating Technology) for the Nextruder combines both nozzle and heat-break

Compatible with:

MK3.9/SMK4/SXLCORE One/+ CORE One L