The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
Update:
The steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.
Upgrade your 3D printer with this easy-swappable 400°C HT Hotend. You will unlock the ability to print high-temp materials like PEKK-CF, PPS-CF, PPSU, and more. Plus, get improved strength and increased layer adhesion with advanced materials like ASA or PA. This product is a fully assembled Hotend for the Nextruder
Prusament PLA Prusa Azure Blue 1.75mm 1kg is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
Get the ultimate driver kit from iFixit. The iFixit Mako driver kit includes all the necessary bits you'll need for all kinds of repairs or assembly. You can tackle any screw you come across on any Original Prusa 3D Printer.
Use Mako set to quickly build your 3D printer kit. Perform basic maintenance, hacks, upgrades, or complex repairs of your 3D printer with ease. All of this is in a sturdy case and a compact size.
A must-have accessory (or a perfect gift) for any maker!
E3D Purpsa Nozzle X 0.60mm from E3D's V6 line-up is recommended for printing abrasive material and at high temperatures, which causes the standard brass nozzle to wear out very quickly. The E3D Prusa X Nozzle V6 0.60mm is available now from ShapeShop!
Prusa Heatbed Power Cable (Einsy) – This product is the replacement Heatbed to Einsy power cable. The Prusa Heatbed Power Cable (Einsy) is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.
Price$17.95
The Prusa XL PEI Smooth Print Sheet is a double-sided smooth spring steel sheet for Original Prusa XL
