![eSUN ePLA-CF 3D Filament 1.75mm 1kg eSUN ePLA-CF 3D Filament 1.75mm 1kg](https://shapeshop.com.au/1908-medium_default/esun-epla-cf-3d-filament-175mm-1kg.jpg)
eSUN PETG Filament 1.75mm 2.5KG
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
eSun ePLA-CF Carbon Fibre PLA is a new material integrating German-imported short-cut carbon fibers into PLA.
eSun ePLA-CF Carbon Fibre PLA is a new material integrating German-imported organic impregnated short-cut carbon fibres into PLA. The infusion of carbon fibres not only fortifies the PLA's structural integrity but also lends it a sleek matte finish and a unique sandblasted texture reminiscent of carbon fibres. Whether employed for structural reinforcement or aesthetic enhancement, ePLA-CF stands out effortlessly due to its exceptional qualities, ease of printing, and seamless high-speed printing processes.
* High strength
* Matte finish
* Carbon Fibre texture
* Excellent printability
* High Speed printing
3D PRINTING FILAMENT |
ePLA-CF |
|
Melt Flow Index(g/10min) |
5.37 (190℃/2.16kg) |
|
Density |
1.21 g/cm3 |
|
Impact Strength |
5.08 kJ/㎡ |
|
Tensile Strength(MPa) |
39 MPa |
|
Elongation at Break(%) |
4.27% |
|
Flexural Strength(MPa) |
103 MPa |
|
Flexural Modulus(MPa) |
5005 MPa |
Filament |
ePLA-CF |
Recommended printing temperature |
190-230℃ |
Nozzle Type |
Hardened Steel |
Bed temperature |
45-60℃ |
Recommended Build Surfaces | PEI |
Fan Speed |
100% |
Printing speed |
50-300mm/s |
1.If there is a decrease in printing performance with ePLA-CF, it is recommended to dry (60°C/ >4H) before printing to achieve the best printing results.
2.ePLA-CF filament is relatively rigid and should not be excessively bent. In the feeding pipeline, try to avoid excessive bending of the filament to prevent breakage.
3.ePLA-CF contains carbon fiber, and prolonged use may cause excessive wear on the nozzle and extruder gears. It is recommended to use a hardened steel nozzle, and if possible, opt for hardened steel extruder gears.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
A Glow-in-the-dark filament with amazing vibrancy and glow!
eSUN Polycarbonate filament is perfect to be used to build structural or fire resistant parts.
A material developed by eSUN and LUVOCOM based on PA12, added with 15% carbon fiber, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
eFLEX TPU has high flexibility, flexural tensile resistance, wear resistant and age resistant. The product prints with a certain degree of transparency.
eABS MAX is a high quality halogen-free, flame retardant 3D filament that adds to the toughness of ABS+ and offers flame retardant efficiency.
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
eSun ePLA-LW Light Weight PLA is a new material specifically designed for printing RC Aeroplanes and other lightweight items.The foaming ratio is up to 220%!
**PLEASE NOTE NATURAL IS OUT OF STOCK ETA AT THIS STAGE IS UNKNOWN AND WE WILL KEEP PAGE UPDATED**
eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
eSUN Silk Mystic - a new composite PLA filament made with glossy silk appearance with a three colour gradient. Due to the elastic-like properties of this filament layers are very difficult to distinguish.
A material developed by eSUN and LUVOCOM, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
eSUN's PETG - An easy to print material with good heat resistance, strength and a little bit of flexibility.
eSun Luminous Rainbow is a modified PLA material. It has gorgeous luminous rainbow appearance effect! The luminous effect can change based on the UV Radiation received!
ASA is a fantastic ABS replacement. Its UV resistance is fantastic and this makes it perfect for Outdoor use.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
A ShapeNerd favourite!
eSun ePLA-CF Carbon Fibre PLA is a new material integrating German-imported short-cut carbon fibers into PLA.