• Out of Stock
eSUN PETG Yellow 3D Filament 1.75mm 1kg | eSun PETG Filament
search
  • eSUN PETG Yellow 3D Filament 1.75mm 1kg | eSun PETG Filament
  • eSUN PETG Yellow 3D Filament 1.75mm 1kg | eSun PETG Filament
  • eSUN PETG Yellow 3D Filament 1.75mm 1kg | eSun PETG Filament

eSUN PETG Yellow 3D Filament 1.75mm 1kg

Price: $25.95
inc GST

eSUN PETG Yellow 3D Filament 1.75mm 1kg is an easy to print material with good heat resistance, strength and a little bit of flexibility.

Quantity
Out of Stock

0 units are in stock.

eSUN PETG Yellow 3D Filament 1.75mm 1kg

Buy eSUN PETG Yellow 3D Filament 1.75mm 1kg online from ShapeShop and save!

  • Consistently high quality
  • 100% recyclable
  • Environmentally friendly
  • FDA food safety approved
  • Odorless
  • High mechanical strength
  • Excellent flexibility
  • Low shrinkage rate
  • Great gloss at slower print speeds

Printing Guidelines

  • Print Hot-end temperature: 230~250c
  • Print Bed temperature: 80~95c
  • Print Speed: 30~60mm/s

Filament Storage

  1. If your printer will be idle for more than a few days, please remove the filament from the nozzle to prevent moisture absorption.
  2. In order to extend the lifespan of your filament, it is best practice to place the filament into a sealed container or back into the original vacuum bag and store in a cool, dry environment.
  3. When storing your filament, pass the loose end of the filament thread through the holes on the edge of the spool to avoid tangles. This way it will unspool properly the next time you use it.

Along with this high-quality eSun PETG filament, ShapeShop offers a wide range of 3D printer filaments from eSun – including an extensive selection of eSun PLA+ filament and eSun PLA filament products – and other top 3D printer brands!

ES_PETG_SOLID_YELLOW_1KG

Data sheet

Material Type
PET/PETG
Hotend Temperature
240 - 260 °C
Heatbed Temperature
60 - 80 °C
Print Speed
40 - 80mm/s
Spool Dimensions
eSUN PAPER - Width 61mm | Outer 200mm | Inner 56mm
Empty Spool Weight
250gm eSUN Black Plastic

Specific References

UPC
840249162141
EAN13
6922572262140
MPN
PETG175Y1Y1
New

Download

eSUN PETG TDS

TDS eSUN PETG

Download (380.37KB)

You might also like

iSANMATE PETG Yellow 3D Filament 1.75mm 1kg | iSANMATE PETG Filament
Quick view

iSANMATE PETG Yellow 3D Filament 1.75mm 1kg

iSANMATE PETG Yellow 3D Filament 1.75mm 1kg is known for its high temperature resistance, waterproof properties and efficient/low power printing rate.  It combines the durability of ABS with the easy printing characteristics of PLA, making it a reliable and versatile choice for 3D printing.

  • Heat Resistant
  • Excellent Chemical Resistance
  • High Impact Strength
  • +/-0.02mm tolerance diameter
  • Neat windings 
Price $19.95

16 other products in the same category

eSUN eSilk Red Silk PLA Filament 1.75mm 1kg | eSUN Silk PLA Filament
  • Out of Stock
Quick view

eSUN eSilk Red PLA Filament 1.75mm 1kg

eSUN eSilk Red PLA Filament 1.75mm 1kg is a composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

Price $26.95
eSUN PLA Basic Light Grey 3D Filament 1.75mm 1kg
  • Out of Stock
Quick view

eSUN PLA Basic Light Grey 3D Filament 1.75mm 1kg

eSUN PLA Basic Light Grey 3D Filament 1.75mm 1kg is an entry-level 3D Printing filament designed with beginners in mind.  Based on modified PLA, this filament is easy to print, emits no irritating odors, resists stringing and warping and delivers excellent print quality.  It is a cost effective choice amongst 3D printing enthusiasts.

Price $16.95
eSUN PLA+ Mint Green 3D Filament 1.75mm 1kg | PLA+ 3D Printer Filament
Quick view

eSUN PLA+ Mint Green 3D Filament 1.75mm 1kg

eSUN PLA+ Mint Green 3D Filament 1.75mm 1kg delivers improved physical properties, available in a variety of colours, a great filament for prototyping and modelling – available for delivery across Australia from ShapeShop!

Price $25.95
eSUN PLA Basic Black 3D Filament 1.75mm 1kg
  • Out of Stock
Quick view

eSUN PLA Basic Black 3D Filament 1.75mm 1kg

eSUN PLA Basic Black 3D Filament 1.75mm 1kg is an entry-level 3D Printing filament designed with beginners in mind. Based on modified PLA, this filament is easy to print, emits no irritating odours, resists stringing and warping and delivers excellent print quality. It's a cost effective choice amongst 3D printing enthusiasts.

Price $16.95
eSUN PLA Rock Blueschist 3D Filament 1.75mm 1kg
  • On sale!
  • -25%
Quick view

eSUN PLA Rock Blueschist 3D Filament 1.75mm 1kg

eSUN PLA-Rock filament is crafted with a matte formulation to produce a frosted, stone-like surface, replicating the natural hues and textures of real rock. Its dual-color gradient technique adds layered depth and an artistic flair to printed objects. eSUN PLA Rock Blueschist 3D Filament 1.75mm 1kg offers enhanced strength and durability, reducing the risk of filament breakage and ensuring consistent, uninterrupted printing without nozzle clogging issues.

Price $20.96 Regular price $27.95