E3D Bambu Lab A1, A1Mini & A2L HotEnd HF Obxidian 0.40mm

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.

Product Features:

•     Compatibility: Bambu Lab A1, A1 Mini and A2L
•     Drop-in replacement HotEnd for Bambu A1, A1 Mini, and A2L Series
•     70% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.

Product Features:

•     Compatibility: Bambu Lab A1, A1 Mini and A2L
•     Drop-in replacement HotEnd for Bambu A1, A1 Mini and A2L Series
•     70% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Powered by brand new ObXiDian® 500 technology, these premium HotEnds are an official collaboration between E3D and Bambu Lab.   

Product Features:

•     Compatibility: Bambu Lab H2D, H2S, H2C, P2S, X2D and A2L
•     Drop-in replacement HotEnd for Bambu Lab H2D, H2S, H2C, P2S, X2D and A2L
•     60% additional flow rate when compared to the standard Bambu hotend!
•     Built to last - at least five times more wear resistant than ObXidian™
•     Print ANY filament, including glow in the dark, and fibre filled filaments
•     Officially Approved & Licensed Bambu product

Powered by brand new ObXiDian® 500 technology, these premium HotEnds are an official collaboration between E3D and Bambu Lab.   

Product Features:

•     Compatibility: Bambu Lab H2D, H2S, H2C, P2S, X2D and A2L
•     Drop-in replacement HotEnd for Bambu Lab H2D, H2S, H2C, P2S, X2D and A2L
•     60% additional flow rate when compared to the standard Bambu hotend!
•     Built to last - at least five times more wear resistant than ObXidian™
•     Print ANY filament, including glow in the dark, and fibre filled filaments
•     Officially Approved & Licensed Bambu product

These premium HotEnds are an official collaboration between E3D, DiamondBack and Bambu Lab, bringing the most extreme abrasion resistance possible for your H2D, H2C, H2S or P2S printer.    

Product Features:

• Compatibility: Bambu Lab H2D, H2C, H2S P2S X2D A2L
• Drop-in replacement HotEnd for Bambu H2D, H2C, H2S, P2S, X2D and A2L
• Print any Filament! Tackle the toughest metal, ceramic, and fibre-filled filaments with ease
• Guaranteed Longevity - upgrade with piece of mind that you'll never need to change out another nozzle
• Experience exceptional thermal conductivity that improves layer adhesion for tougher parts
• Officially Approved & Licensed Bambu product

These premium HotEnds are an official collaboration between E3D, DiamondBack and Bambu Lab, bringing you one of the most extreme HotEnd solution to date.   

E3D Bambu Lab P1 Complete HotEnd DiamondBack 0.40mm Product Features:

•     Compatibility: Bambu Lab P1
•     Drop-in replacement HotEnd for Bambu P1
•     Print any Filament! Tackle the toughest metal, ceramic, and fibre-filled filaments with ease
•     Guaranteed Longevity - upgrade with piece of mind that you'll never need to change out another nozzle
•     Experience exceptional thermal conductivity that improves layer adhesion for tougher parts
•     Officially Approved & Licensed Bambu product

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.   

Product Features:

•     Compatibility: Bambu Lab P1, P1S
•     Drop-in replacement HotEnd for Bambu P1
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Genuine E3D Obxidian High Flow HotEnds were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date. E3D Bambu Lab X1 Series Complete Hotend High Flow Obxidian 0.40mm offer a wide range of key benefits and features.

Product Features:

•     Compatibility: Bambu Lab X1, X1C (X1 Carbon)
•     Drop-in replacement HotEnd for Bambu X1
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Genuine E3D Bambu Lab X1/P1 HotEnd High Flow Obxidian 0.60mm were developed in collaboration with Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.   

Product Features:

•     Compatibility: Bambu Lab X1, X1C (X1 Carbon), P1S, and P1P
•     Drop-in replacement HotEnd for Bambu X1 and P1 Series
•     60% additional flow rate when compared to the standard Bambu hotend!
•     ObXidian™ hardened tipped nozzle
•     E3DLC™ coating offers additional non-stick properties
•     Officially Approved & Licensed Bambu product

Genuine E3D premium, high-flow Obxidian Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max and Ender 3 V3/Plus 3D printers.

Product Features:

•     Compatibility: Creality K1C, K1 Max, Ender 3 V3, Ender 3 V3 Plus
•     Swift Installation
•     83% additional flow rate when compared to the stock Creality nozzles
•     Titanium heat creep resistant HeatBreak
•     E3D multi-channel High Flow insert design
•     Great for speedy PLA printing

Genuine E3D premium, high-flow Obxidian Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max and Ender 3 V3/Plus 3D printers.

Product Features:

•     Compatibility: Creality K1C, K1 Max, Ender 3 V3, Ender 3 V3 Plus
•     Swift Installation
•     83% additional flow rate when compared to the stock Creality nozzles
•     Titanium heat creep resistant HeatBreak
•     E3D multi-channel High Flow insert design
•     Great for speedy PLA printing

Genuine E3D premium, high-flow Obxidian Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max and Ender 3 V3/Plus 3D printers.

Product Features:

•     Compatibility: Creality K1C, K1 Max, Ender 3 V3, Ender 3 V3 Plus
•     Swift Installation
•     83% additional flow rate when compared to the stock Creality nozzles
•     Titanium heat creep resistant HeatBreak
•     E3D multi-channel High Flow insert design
•     Great for speedy PLA printing

Explore the advanced capabilities of smarter extrusion with the Roto Klipper ToolBoard, designed by Robert Lorincz.

Features: 

• Direct assembly to Roto
• Microcontroller: STM32F042 (48MHz)
• Automotive USB communication with Raspberry Pi
• Onboard LIS2DW12 accelerometer
• TMC2209 extruder stepper driver
• 1 x PWM 24V controlled part cooling fan output
• 1 x PWM 5V controlled heatsink fan output with RPM speed input signal
• NTC or PT1000 temperature sensor compatibility
• I/0 for bed-level sensing
• X-stop sensor input
• Toolboard and extruder temperature sensor
• Advanced thermal management system

E3D Revo™ HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included).

E3D Revo™ HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included).

This is a replacement heatsink for Revo™ Six. It retains the same dimensions as the E3D V6 – including height, diameter, and groove mount – so any printer with a V6 setup can use it without a print head redesign.

Features: 

• Compatible with 1.75mm filament
• Anodised black aluminum heatsink keeps things cool and looks cool too
• Identical height, diameter, and groove mounting to E3D V6 for drop-in upgradability 
• Works with Revo HeaterCore and Revo Nozzles – change nozzles without tools and hot tightening! 

E3D Online have developed this Revo-compatible HeatSink in collaboration with Team Voron.  It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. (Note: This means this kit will ship without a fan!)

E3D Revo™ High Temperature Hotside PT1000 500c.  Compatible with Prusa Pro HT90 3D printer, Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX

Features: 

• Maximum temperature: 400°C/500°C 
• Filament diameter: 1.75mm   
• Voltage: 24V 
• Power: 40W or 65W

If you’re just getting started with 3D printing or primarily 3D print materials such as PLA, PETG and ASA at standard speeds then these kits are ideal for you. Equipped with 2 brass Revo nozzles and a 40W HeaterCore, our Starter Packs enable you to experiment with the two most common nozzle sizes.

Features: 

• Best value entry-point for Revo 
• Tool-free nozzle changes in under 60 seconds 
• Brass nozzles for everyday 3D printing 
• 40W Heatercore enabling rapid heat-up/cool-down 

E3D Revo™ Belt nozzle for printing on a 45. Compatible with Prusa Pro HT90 printer.

E3D Revo™ High flow nozzle for fast printing. The E3D Revo Nozzle High Flow Brass 0.40mm is compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

E3D Revo Nozzle High Flow Brass 0.60mm

Designed for fast printing. Compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

The E3D Revo Nozzle High Flow Brass 0.80mm nozzle for fast printing. Compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

E3D Revo Nozzle High Flow Obxidian 500 0.40mm

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

The E3D Revo Nozzle High Flow Obxidian 500 0.60mm is a high-quality 3D printing nozzle. Available for shipping Australia-wide.

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

These retention springs clip onto your Revo™ HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity. 

Features: 

• Keeps the HeaterCore into good thermal contact with a Revo Nozzle
• Effective in attaching Revo HeaterCore to heatsink 
• Compatible with Revo Micro, Revo Six, and Revo Hemera