If you’re just getting started with 3D printing or primarily 3D print materials such as PLA, PETG and ASA at standard speeds then these kits are ideal for you. Equipped with 2 brass Revo nozzles and a 40W HeaterCore, our Starter Packs enable you to experiment with the two most common nozzle sizes.

Features: 

• Best value entry-point for Revo 
• Tool-free nozzle changes in under 60 seconds 
• Brass nozzles for everyday 3D printing 
• 40W Heatercore enabling rapid heat-up/cool-down 

E3D Revo™ Belt nozzle for printing on a 45. Compatible with Prusa Pro HT90 printer.

E3D Revo™ High flow nozzle for fast printing. The E3D Revo Nozzle High Flow Brass 0.40mm is compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

E3D Revo Nozzle High Flow Brass 0.60mm

Designed for fast printing. Compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

The E3D Revo Nozzle High Flow Brass 0.80mm nozzle for fast printing. Compatible with Prusa Pro HT90 printer.

Features: 

• Improved internal nozzle geometry
• Increased volumetric flow rate
• Print temperatures up to max. 300°C
• 30-second nozzle change

E3D Revo Nozzle High Flow Obxidian 500 0.40mm

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

The E3D Revo Nozzle High Flow Obxidian 500 0.60mm is a high-quality 3D printing nozzle. Available for shipping Australia-wide.

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

Product Features:

•     Rated up to 500c
•     Boost your flowrate with E3D's unique 4-Channel insert   
•     Built to last at least 5 times more west resistant than ObiXidian®
•     Print any material with the super abrasive-resistant nozzle
•     Non-stick nozzle that prevents plastic build-up and reduced print crashes
•     Effortless upgrade - no hardware modifications needed 

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

E3D Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Features: 

• Mass: 146
• Extrusion force: 70N+
• Filament Diameter: 1.75mm
• Recommended motor current: 0.45A PEAK
• Gear ratio: 11.262:1
• Operational temp rating: 40°C

These retention springs clip onto your Revo™ HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity. 

Features: 

• Keeps the HeaterCore into good thermal contact with a Revo Nozzle
• Effective in attaching Revo HeaterCore to heatsink 
• Compatible with Revo Micro, Revo Six, and Revo Hemera

eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

The eSUN ABS Cold White 3D Filament 1.75mm 1kg; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

The eSUN ABS Grey 3D Filament 1.75mm 1kg; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

The eSUN ABS Peak Green 3D Filament 1.75mm 1kg; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSUN ABS Red 3D Filament 1.75mm 1kg; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSUN ABS Silver 3D Filament 1.75mm 1kg; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments. 

eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments. 

The eSUN ABS+ Grey 3D Filament 1.75mm 1kg Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments. 

eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.

eSUN ePA Nylon filament is an incredibly strong, durable, and versatile printing material.

eSUN ePA-CF Nylon Carbon Fibre 1.75mm Filament 1kg - Nylon based with 20% Carbon Fibre. High strength, High rigidity, wear resistant and it looks fantastic!

eSUN ePA12 Nylon is a material developed by eSUN and LUVOCOM, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.

eSUN ePA12-CF Nylon Carbon Fibre is a material developed by eSUN and LUVOCOM based on PA12, added with 15% carbon fiber, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.

eSUN ePAHT-CF High Temperature Nylon6 + Carbon Fibre is a high-performance material based on PA6 developed by eSUN and LUVOCOM with 15% high-rigidity carbon fiber. It offers High strength, High rigidity, can sustain temperatures of 150c and short-term temperatures of 180c and it looks fantastic!

eSUN ePC Polycarbonate 1.75mm 0.5kg is perfect to be used to build structural or fire resistant parts.

The eSUN ePLA-LW Black Light weight PLA is a new material specifically designed for printing RC Aeroplanes and other lightweight items.The foaming ratio is up to 220%!

The eSUN ePLA-LW White Light weight PLA is a new material specifically designed for printing RC Aeroplanes and other lightweight items.The foaming ratio is up to 220%!

eSUN Silk - composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN eSilk Bronze PLA Filament 1.75mm 1kg is a composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN eSilk Copper PLA Filament 1.75mm 1kg is a composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN Silk - composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN eSilk Gold PLA Filament 1.75mm 1kg is a composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN Silk - composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN eSilk Lime PLA Filament 1.75mm 1kg is a composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.

eSUN Silk - composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.