Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Higher Flow. Thanks to E3D’s unique high-flow internal geometry that increases surface area for better heat transfer, these nozzles significantly boost your setup's volumetric flow rate, allowing you to print faster!
Abrasion Resistance. With wear resistance far superior to any generic hardened steel nozzle, ObXidian is exceptionally hard, making it ideal for printing abrasive or filled polymers. This is accomplished by combining a tool steel insert with E3D’s custom E3DLC™ coating. This specially formulated coating also provides non-stick properties, significantly reducing plastic build-up around the nozzle.
Drop-in upgrades. These nozzles maintain the exact same form factor as standard Prusa Nozzles; this means there is no need to adjust your pre-existing mount and fan duct setups.
Quick Nozzle Changing. Changing a nozzle on your Prusa printer has never been easier! Waste less time changing your nozzles and more time experimenting with different sizes and materials.
Easy identification. Each Nozzle has its size engraved into it.
Features:
Technical Parameters:
This product includes:
Genuine E3D Prusa Nozzle: High Flow Brass
To replace the part/s, please consult Prusa's Assembly Manuals. Make sure to follow the manual for your printer model.
Copper wire brush - perfect for cleaning your printer nozzle!
This adapter makes your Nextruder compatible with any V6 nozzle. You can use it on your Original Prusa XL and MK4
Compatible with:
MK3.9MK4/SXLCORE One
Spare HEPA filter for Prusa Products please check the compatibility
Compatible with:
HT90 MINI EnclosureXL EnclosureMKx Enclosure
This product is a replacement screw for the Nextruder compatible with:
Thumb screw is used to hold the Prusa Nozzle inside the heatsink. For the Nextruder two thumb screws are required.
MK3.9MK4
The ObXidian Nozzle is a high-quality nozzle designed specifically for abrasive materials and for printing at high temperatures.
Compatible with:
MK3.9MK4/SXLCORE One
This product is a replacement Pulley with bearing for the CoreXY, compatible with:
MK4XLMK4S
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9
This product is the replacement MMU2S to Einsy power cable. It is ONLY compatible with the MK3/S. It is NOT compatible with the MK2.5/S.
This product is an optional accessory, compatible with:
MK3.9MK4XL
This product is the replacement PSU to Einsy power cable. It is ONLY compatible with the black housing PSU.
This product is a replacement 40W heater for the Nextruder, compatible with:
MK3.9MK4XL
This product is the replacement hotend PTFE tube
ONLY compatible with the Mini/+
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
"In-Stock" items are for pickup only.
All deliveries subject to current lead-time: 10 Days
Flat-Rate Shipping: $150inc GST per unit, within Australia.
The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to info@shapenerd.com and one of our friendly team will be in touch.
Universal lubricant with applicator for printer maintenance.
Pricing includes all Taxes and Customs/Duty fees
Official Prusa Reseller - 1Y MFG Warranty & Support!
"In-Stock" items are for pickup only.
All deliveries subject to current lead-time: 10 Days
Flat-Rate Shipping: $150inc GST per unit, within Australia.
The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36×36×36cm and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste
Are you considering Original Prusa 3D printers for your workplace, government department, classroom, school, library, university, or maker space? Request a quote to info@shapenerd.com and one of our friendly team will be in touch.
Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere.
This improves the overall reliability of the printer and makes changing nozzles much faster.
Compatible with:
MK3.9MK4/SXLCORE One
