A complete, high quality, all-metal v6 Volcano hotend.
This is a very high quality, V6 Volcano All-Metal hotend. It's suitable for 1.75mm filament only.
Included in this package is:
1x Aluminium V6 Volcano Heat Block - Cartridge sensor style. 1x grub screw and 1x heat cartridge clamp screw
1x Aluminium V6 Heat Sink
1x All-Metal V6 Heat Break
1x 0.4mm Volcano Nozzle
2x PTFE Clips
2x PTFE Locking Clips
PTFE tube is still used through the throat of the Heat-Sink and seats onto the top of the heat-break. PTFE does NOT go through the heat-break to the nozzle.
A heat cartridge and a thermal sensor (cartridge style) is required to complete this hotend.
Excellent quality, 40w Ceramic Heat cartridge with a stainless steel outer sheath.
High quality ATC Semitec 104GT-2 thermistor cartridge to suit most common hot-end heat blocks that use a cartridge style thermistor.
Excellent quality, 50w Ceramic Heat cartridge with a stainless steel outer sheath.
This product is a replacement Pulley with bearing for the CoreXY, compatible with:
MK4XLMK4S
High quality machined Volcano Heat Block. Supports cartridge style thermistor.
This product is the replacement part of the Dock Pin for the Original Prusa XL
XL
High quality machined Swiss/CR10 Heat Block. Supports loose/glass style thermistor.
This product is a filament sensor for the Nextruder, compatible with:
MK3.9MK4XL
High quality Swiss Style MK10 All-Metal Upgrade Kit w/ 0.4mm Nozzle.
This product is the replacement Hotend heatsink, compatible with:
MK4XLMK3.9MK4SMK3.9S
This is an aluminum block for the Hot-end assembly dedicated for printers using Nextruder.
Compatible with:
MK4XLMK3.9
This product is the replacement part of the Calibration Pin for the Original Prusa XL
XL
This is a high quality, titanium & copper alloy bi-metal heat-break.
A complete, high quality, all-metal v6 Volcano hotend.
