- -15%
eSUN PLA-PRO Resin 1 Litre
eSun PLA PRO Bio-Based Resin is a environmental friendly resin made for LCD/LED light source printers.
eSun High-Temp 3D Print Resin is specifically designed temperature resistance and can be heated to 120C. Can be used for high temperature dental molds to meet the needs of dental model assembly and manufacturing fine, high temp with low deformation.
Product Features
High-Temp Resin, Compatible to most LCD printers and DLP with LED UV.
High Hardness 82-84 shore D, Low Shrinkage
High precision, strength and rigidity
Low Odor and No Toxic
Resin parameters
Hardness (D): 82-84D
Viscosity (25C,mPa.s): 180 to 220 mpa.s
Density: 1.09 to 1.10 g / cm3
Heat Distortion Temp (C): 100.5 (after printing, place in 150C oven for 30mins)
Physical Properties
Flexural strength (Mpa): 95Mpa to 105Mpa
Tensile strength (Mpa): 70Mpa to 85 Mpa
Elongation at break (%): 35% to 40%
Hardness (D): 82-84D
Precautions
Storage
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
3) Avoid any dusty or moist environment.
Usage
Shake well before use. Avoid any direct sunlight during usage.
Keep away from the children.
Do not drink, do not put in mouth.
Wear gloves and safety equipment.
Avoid direct contact with the skin.
Use only in a well ventilated room.
If product comes in contact with skin, please wash with plenty of water immediately. Seek medical advice immediately if necessary.
Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.
eSun PLA PRO Bio-Based Resin is a environmental friendly resin made for LCD/LED light source printers.
eSun eLastic 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.
Hard-Tough resin is made for LCD 3D printing projects that require excellent physical strength, high hardness and toughness.
eSun Standard 3D Print Resin is specifically designed for LCD light source printers to achieve better printing quality.