A PLA Based filament with Glow-in-the-dark star-like appearance!
A PLA Based filament with Glow-in-the-dark star-like appearance!
ShapeNerd advice:
All materials regardless of type, require the tuning of Extrusion Multiplier(EM)/Filament Flow % in order to print well and accurately. This is a great document to help you tune your EM: https://help.prusa3d.com/article/extrusion-multiplier-calibration_2257
|
3D PRINTING FILAMENT |
Test Method |
PLA |
|
Melt Flow Index(g/10min) |
GB/T 3682-2000 |
3.5(190℃/2.16kg) |
|
Density |
1.2g/cm3 |
|
|
IZOD Impact Strength(kJ/㎡） |
GB/T 1843-96 |
5.4kJ/m2 |
|
Tensile Strength(MPa） |
GB/T 1040-92 |
72MPa |
|
Elongation at Break(%) |
GB/T 1040-92 |
11.8% |
|
Flexural Strength(MPa) |
GB/T 9341-2000 |
90MPa |
|
Flexural Modulus(MPa) |
GB/T 9341-2000 |
1915MPa |
|
Heat Distortion Temp |
GB/T 1634-2001 |
53℃ |
|
Filament |
eStars-PLA |
|
Recommended printing temperature |
210-230℃ |
|
Bed |
45-60℃ (Masking paper, PVP solid glue, glass board, carbon fiber board, PEI) |
|
Fan |
100% |
|
Printing speed |
40-100mm/s |
Print Hot-end temperature: 210~230c
Print Bed temperature: 45~60c
Print Speed: 40~100mm/s
** Please be aware that Glow-in-the-dark filament is considered abrasive, and a Hardened nozzle is STRONGLY recommended.
eSun Marble PLA 3D print filament is a composite PLA filament with marble-like appearance.
eSun ePLA-LW Light Weight PLA is a new material specifically designed for printing RC Aeroplanes and other lightweight items.The foaming ratio is up to 220%!
eSun Luminous Rainbow is a modified PLA material. It has gorgeous luminous rainbow appearance effect! The luminous effect can change based on the UV Radiation received!
eSUN Silk Mystic - a new composite PLA filament made with glossy silk appearance with a three colour gradient. Due to the elastic-like properties of this filament layers are very difficult to distinguish.
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
eSun ePLA-CF Carbon Fibre PLA is a new material integrating German-imported short-cut carbon fibers into PLA.
Through the modification of PLA, ePLA-Lite not only maintains the characteristics of easy printing of PLA filament, but also improves the printing performance and physical strength on the original material. This is a cost-effective alternative.
eSUN PLA+ refill pack can be installed on your clear filament spool or you can print your own.
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
A Glow-in-the-dark filament with amazing vibrancy and glow!
Through the modification of PLA, ePLA-Lite not only maintains the characteristics of easy printing of PLA filament, but also improves the printing performance and physical strength on the original material. This is a cost-effective alternative.
eSun PLA-ST "Super Tough PLA" offers outstanding mechanical properties while printing easily like other PLA filaments. PLA-ST filament; the perfect choice for printing mechanical part prototypes.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
eSUN Silk - a new composite PLA filament made with glossy silk appearance. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
The all-new PLA+ filaments are superior to all original PLA filaments. Available in a variety of colours. A great filament for prototyping and modelling.
eSUN Silk Magic - a new composite PLA filament made with glossy silk appearance in two tone. Due to the elastic-like properties of this filament layers are very difficult to distinguish. It has to be seen to be appreciated.
A PLA Based filament with Glow-in-the-dark star-like appearance!
