PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C and is suited to parts in very demanding environments such as gears, engine brackets, pipe connectors or high velocity air flows.
FEATURES
Excellent Toughness - PolyMide™ CoPA combines outstanding mechanical strength and toughness to deliver an easy-to-use filament for engineering applications such as gears, engine brackets, pipe connectors, and high-velocity air flows.
Excellent Heat Resistance - PolyMide™ CoPA can be annealed[1] after printing to produce heat-resistant parts with softening temperatures up to 180 °C, PolyMide™ CoPA is one of the most heat-resistant Nylon 3D printing materials on the market.
Warp-Free™ - PolyMide™ CoPA features Polymakers Warp-Free™ technology to deliver a reliable Nylon filament with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of the microstructure and crystallization behavior of Nylon, which enables the material to fully release internal stress before solidification. The Warp-Free™ technology in PolyMide™ CoPA is designed to work best with minimal bed temperatures.
Improved Printability – In comparison to other Nylon filaments, PolyMide™ CoPA is extremely easy to work with. It is compatible with most filament-based 3D printers with no heated chamber or heated bed required!
Wear Resistance - Parts printed in PolyMide™ CoPA display fantastic wear resistance.
Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.
[1] PolyMide™ CoPA displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. PolyMide™ CoPA can be annealed in the oven at 80˚C for 6 hours right after the printing process.
Printing Guides
Printing Temperature: 250˚C - 270˚C
Bed Temperature: 25˚C - 50˚C
Printing Speed: 30mm/s - 60mm/s
Fan: OFF
Drying Settings: 80˚C for up to 12 hours
Nylon plastics are hygroscopic and display different mechanical properties depending on the moisture content of the part; dry, conditioned or saturated.
Dry state represents the properties of PolyMide™ CoPA after printing and annealing, the material displays high tensile strength, stiffness (Young's modulus) and great impact resistance.
Moisture conditioned state represents the properties of PolyMide™ CoPA after annealing and conditioning the print at 70% relative humidity for 15 days. Unless coated with a moisture barrier it is assumed that all nylon parts become moisture conditioned. Moisture conditioning significantly increases the impact strength and flexibility of the Nylon 6 / 6,6.
PolyWood is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs. PolyWood is made entirely with PLA using a special foaming technology. It exhibits similar density and appearance as wood.
Special PLA formula designed for cosplay props application, version B is well suited for CosPlay models that may encounter impacts like Helmut's, Sword's, Hammer's and Armour.
PolyTerra™ Gradient Matte PLA delivers a smooth matte surface finish with a stunning rainbow gradient and is manufactured with Polymakers Jam-free™ technology.
Pastel Rainbow Colour Cycle: Approximately every 200g
