A complete, high quality, all-metal v6 hotend.
Prusa Double-sided Textured PEI Power-coated Spring Steel Sheet
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S.
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
16 other products in the same category
Precision machined GT2 80Tooth Synchronous Pulleys. Perfect for linear motion with minimal backlash and maximal positioning accuracy.
eSun High-Temp 3D Print Resin is specifically designed temperature resistance and can be heated to 120C. Can be used for high temperature dental molds to meet the needs of dental model assembly and manufacturing fine, high temp with low deformation.
Brushless DC Blower Fan with extra fittings to support various connection requirements. Lead length ~1M.
High Quality, Durable, Plated Copper v6 style nozzles for 1.75mm filament.
High Temperature 500°c Thermistor based on Dyze Design in a cartridge style package. Compatible with v6 and Volcano cartridge-style heat blocks.
This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break
This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.
POWGE 2GT 9mm Timing belt, Available by the meter and cut to length. This is a very high quality belt.
A material developed by eSUN and LUVOCOM, greatly enhances the strength, rigidity and toughness of nylon. Low water absorption rate.
eFLEX TPU has high flexibility, flexural tensile resistance, wear resistant and age resistant. The product prints with a certain degree of transparency.
An inexpensive, easy to use storage solution for your filament.
10x Vacuum bags
1x Hand Pump
a 5 Pin 2M Extension cable for BLTouch Sensors.