eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.
Please note that eSUN is transitioning over to cardboard spools.
| Recommended Print Settings | ||
| Nozzle Temp | C | 240 |
| Bed Temp | C | 95-110 |
| Print Speed | mm/s | 40-100 |
| Filament Properties | ||
| Density | g/cm3 | 1.04 |
| Melt Flow Index | g/10min | 12 |
| Heat Distortion | C | 78 |
| Tensile Strength | MPa | 43 |
| Elongation at Break | % | 22 |
| Flexural Strength | MPa | 66 |
| Flexural Modulus | MPa | 1177 |
| IZOD Impact Strength | kJ/m2 | 29 |
ASA is a fantastic ABS replacement. Its UV resistance is fantastic and this makes it perfect for Outdoor use.
eABS MAX is a high quality halogen-free, flame retardant 3D filament that adds to the toughness of ABS+ and offers flame retardant efficiency.
eSun ABS+ 3D Filament is an optimised ABS filament to print with significantly less warping than other regular ABS filaments.
eSun ABS 3D Filament; a strong, durable filament with a low shrinkage rate. This filament CAN be acetone smoothed/welded.
