- Out of Stock.
Hotend PTFE Tube (MK3S+,...
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa Mini/Mini+
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
This product is the replacement hotend PTFE tube
ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
PTFE Fitting MINI/+ for PTFE tube extruder and heatsink connections.
This is Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.
This product is the replacement hotend PTFE tube
ONLY compatible with the Mini/+
High quality machined v6 Heat Block. Supports cartridge style thermistor.
This product is a replacement Spring Steel Sheet With Smooth Double-sided PEI for the Original Prusa i3 MK3/S and MK2.5/S heatbeds.
Prusament PLA is an in-house-made filament at Prusa Research. The whole manufacturing process is closely monitored and tested - guarantee ±0.02mm precision and highly consistent colors. You can inspect the parameters of every spool made at prusament.com.
7Genuine Prusa Thermistor for:
MK3SMK3MK2.5SMK2.5MK2SMK3S+MK2
Double-sided powder-coated Satin spring steel sheet for the Original Prusa Mini/Mini+.
This product is the replacement Heatbed to Einsy power cable. It is ONLY compatible with the heatbeds with detachable power cable. It is NOT compatible with heatbeds with power cable soldered directly onto the heatbed.