Prusa MINI Double-sided Power-coated Satin Spring Steel Sheet
Double-sided powder-coated Satin spring steel sheet for the Original Prusa Mini/Mini+.
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).
Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.
Find more details about the spring steel sheets (including usage and maintenance instructions) in Prusa's knowledge base.
WARNING:
Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's knowledge base.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
16 other products in the same category
Prusa MINI Double-sided...
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa Mini/Mini+
Prusa Lubricant Applicator...
Universal lubricant with applicator for printer maintenance.
v6 Hardened Steel Nozzle...
High Quality, Hardened Steel abrasion-resistant v6 style nozzles for 1.75mm filament.
Prusa Bearing Housing 623h
Bearing housing 623h
MK3SMK3MK2.5SMK2.5
MK2SMINIMK3S+MINI+
MK2
v6 Plated Copper Heat Block
A very high-quality Plated Copper Heat Block. Resistant to high temperatures, not easily deformed, and has excellent heat transfer capability making it ideal for high temperature printing.
Prusa MINI Print head PTFE...
This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+.
Prusa Power Panic Cable...
This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.
Prusa Mini Extruder Driven...
This is Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.
Hotend PTFE Tube (MK2.5S,...
This product is the replacement hotend PTFE tube
ONLY compatible with the MK2.5S MK3S and MMU2S hotends
NOT compatible with the MK2.5, MK3, MK3S hotends
Prusa Nozzle Brass...
This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break
Compatible with:
MK4XLMK3.9
Prusa Heatbed Thermistor...
Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+:
MK3SMK3MK2.5SMK2.5MK2SMINIMK3S+MINI+MK2
Prusa Double-sided Textured...
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S.
Prusa Mini/+ Extruder Drive...
This is Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI/+ extruder motor. This drive gear sits directly on the extruder motor shaft.