Prusa Double-sided Textured PEI Power-coated Spring Steel Sheet
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S.
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Find more details about the spring steel sheets in Prusa's knowledgebase.
WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's Blog.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
16 other products in the same category
Prusa Power Panic Cable...
This product is the replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU.
Prusa Print Fan (Genuine)
19This product is the replacement Print fan. It is compatible with the Original Prusa i3 MK3/S/+ and MINI/+.
Prusa MINI Double-sided...
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa Mini/Mini+
Prusa Mini Extruder Driven...
This is Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI/+. This is the driven/idler gear pushing the filament inside the extruder assembly.
Prusa Nozzle Brass...
This all-metal high-precision nozzle for the Nextruder combines both nozzle and heat-break
Compatible with:
MK4XLMK3.9
Prusa MINI Double-sided...
Double-sided powder-coated Satin spring steel sheet for the Original Prusa Mini/Mini+.
Prusa Lubricant Applicator...
Universal lubricant with applicator for printer maintenance.
Prusa Nextruder V6 Nozzle...
This adapter makes your Nextruder compatible with any V6 nozzle. You can use it on your Original Prusa XL and MK4
Compatible with:
MK4XL
Hotend PTFE Tube (Mini/+)
This product is the replacement hotend PTFE tube
ONLY compatible with the Mini/+
Prusa Genuine SuperPINDA
SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI).